1. Garage Doors Operators 24V DC D600 – D1000

2. WHY? To have a product able to compete with market leaders by design and functionality Garage doors operators D600 – D1000 Garage doors operators D600 – D1000

3. The operators D600 and D1000 are electromechanical devices using 24Vdc motors, that can be used in sectional, spring balanced and, with the proper adaptor, in counter-weighted garage doors. D600 is for residential use and D1000 is condominium use or for heavier doors

4. Garage doors operators D600 – D1000 Garage doors operators D600 – D1000 The nylon base makes the operator lighter and with better handling compared to metal. The material is nylon 6.6, 30% glass-charged It has been designed using FEM (Finished Elements Analysis) to stand overloads forces on the door greater than 300Kg

5. Garage doors operators D600 – D1000 Garage doors operators D600 – D1000 Inside we find motor, transformer, control board, 40W light, light diffuser. To make the installation faster only motor is fixed with 3 screws, all other components have been designed with fast fixation slots.

6. Garage doors operators D600 – D1000 Garage doors operators D600 – D1000 D600 has the 531 EM motor, for D1000 a new compact motor have been selected. The 1000N compact motor

7. Garage doors operators D600 – D1000 Garage doors operators D600 – D1000 Endurance tests On counter-weighted door with adapter, 100.000 cycles On a 1400 kg sliding gate, 100.000 cycles = 400 Km linear space covered by the leaf On specific dynamometer test device to prove that the design objective of 100Kg is overcome

8. Garage doors operators D600 – D1000 Garage doors operators D600 – D1000 Patented head-rail connection without tools The operator can be mounted on the rail support without installation tools, a simple rotation to engage 4 supports of the plate and a pin to prevent unfastening. Just a small screwdriver to get the pin out for uninstalling. installingUn-installing

9. Garage doors operators D600 – D1000 Garage doors operators D600 – D1000 How to fix the rail to the operator 1.Mount the support plate on the rail with 2 nuts, the front part is fixed by interference connection 2.Take the operator insert the motor shaft, then rotate till the fins engage into their seats on the base

10. Garage doors operators D600 – D1000 Garage doors operators D600 – D1000 3. Insert the locking pin and the operator is ready. How to fix the rail to the operator

11. Garage doors operators D600 – D1000 Garage doors operators D600 – D1000 Easy and safe electrical wiring The connector is detachable and without screws. All wiring can be done quickly without screwdriver, without remove the cover and without risk of electrical shock since the control board is protected by the plastic cover.

12. Garage doors operators D600 – D1000 Garage doors operators D600 – D1000 Programming OPEN SET UP Simply pressing the “set-up” button the operator will find and store automatically the open and close positions, the deceleration spaces, and forces to move the door. Differently from all others buttons the “open” is accessible also with the cover closed.

13. Is a two-channels decoder integrated in the control board. Can give OPEN A and OPEN B/STOP commands and is compatible with ALL FAAC’s SLH/DS/LC coding systems. Partial opening is possible by remote. A separate plug-in box module will select the frequency 433 or 868 MHz Garage doors operators D600 – D1000 Garage doors operators D600 – D1000 OMNIDEC Decoder

14. Garage doors operators D600 – D1000 Garage doors operators D600 – D1000 Batteries (optional) In case of power blackouts it is possible to open the door by using the backup batteries. The backup kit is made by 20 batteries 1,2V NiMh with plastic container and charger control card. It is possible to mount the Kit inside the operator cover.

15. Garage doors operators D600 – D1000 Garage doors operators D600 – D1000 Selling points  New design  Compact dimensions 360x200x120  Light-weighted: less than 4 Kg  Fast installation: time reduced by 40% (PATENTED)  Nylon base  Wiring and programming by separated access  40W Bulb light with low consumption option  Double isolation (no earth-wiring required)

16. Garage doors operators D600 – D1000 Garage doors operators D600 – D1000 Certifications In progress

17. Garage doors operators D600 – D1000 Garage doors operators D600 – D1000 Packaging A new graphic design has been introduced for both models. An additional internal box will contain the screws and the rails supports.

18. Garage doors operators D600 – D1000 Garage doors operators D600 – D1000 Unique Selling Points Patented fast and tool-less head-rail mounting Backup battery can be fitted inside the head OMNIDEC Double isolation (no earth wiring required) Easy installation and programming Impact forces complying EN 12453-12445 (photocells are not required)

19. Garage doors operators D600 – D1000 Garage doors operators D600 – D1000 Specific advantages against competitors The product has been designed targeting the market reference in Europe for DC garage operators which is the MARANTEC comfort 250 and 252. The goal to match its technical characteristics has been achieved but with a better ratio price/performance. Plus, and like anybody else of course, since it’s a patent, the comfort 250/252 doesn't have the quick head-rail mounting and the multi-frequency module.

20. Availability Garage doors operators D600 – D1000 Garage doors operators D600 – D1000 November 2006 (pre-series September for D600)