Presentation is loading. Please wait.

Presentation is loading. Please wait.

A 128 fiber Slit-Plate assembly, Kinematic mount

Published byMilton Ward Modified over 9 years ago

Similar presentations

Presentation on theme: "A 128 fiber Slit-Plate assembly, Kinematic mount"— Presentation transcript:

1 A 128 fiber Slit-Plate assembly, Kinematic mount
32 fiber Connector Cable Clamp Fiber Array (128 fibers) Cover Plate Furcation tube, 4.5 mm dia. Lenslet Fiber array Pigtail Each array contains 32 fibers Slit-Plate Body Robin Lafever SSL/LBL

2 A 128 fiber Slit-Plate assembly, Kinematic mount
Furcation tube, 4.5 mm dia. Cable Clamp Cover Plate Fiber Array (128 fibers) Lenslet Fiber array Pigtail Each array contains 32 fibers Slit-Plate Body Robin Lafever SSL/LBL 2

3 A 128 fiber Slit-Plate assembly, Kinematic mount
Kinematic mount features This base plate is actually part of the Base Assembly And is shown here to illustrate the Kinematic mounting features Robin Lafever SSL/LBL

4 Kinematic mount Magnets Sphere Parallel Bars Robin Lafever SSL/LBL

5 Slit-Plate bottom view
Robin Lafever SSL/LBL

6 Slit-Plate Top view 128 fiber channels Robin Lafever SSL/LBL

7 Assembly sequence 1 Each ‘Pigtail’ holds 32 fibers
Glue fibers into individual channels Robin Lafever SSL/LBL

8 Groove detail Robin Lafever SSL/LBL

9 Assembly sequence 2 Mechanical clamp Staking compound Epoxy bond
Robin Lafever SSL/LBL

10 Groove detail Robin Lafever SSL/LBL

11 Assembly sequence 3 Cover, also grooved, is bonded in place.
Tooling needed here? This surface is ground and polished to mm Radius Robin Lafever SSL/LBL

12 Groove detail Robin Lafever SSL/LBL

13 Assembly sequence 4 Lenslet bonded in place Robin Lafever SSL/LBL

14 512 fiber Slit Assembly 4 Slit-plate modules (128 fibers each) make up 1 fiber slit assembly (512 fibers) Base plate shown here gets integrated into the carrier assembly TBD Robin Lafever SSL/LBL

15 512 fiber Slit Assembly 4 Slit-plate modules (128 fibers each) make up 1 fiber slit assembly (512 fibers) Repositional Kinematic mount features: Spheres on the Slit-plate, Parallel bars ont the base-plate Magnetic clamping Base plate shown here gets integrated into the carrier assembly TBD Robin Lafever SSL/LBL

16 Fitup to Spectrograph Robin Lafever SSL/LBL

17 Fitup to Spectrograph Robin Lafever SSL/LBL

18 Fitup to Spectrograph, close up
Robin Lafever SSL/LBL

Download ppt "A 128 fiber Slit-Plate assembly, Kinematic mount"

Similar presentations

1 FO Small Distributors The interface between the public and the private network.

1 FO Small Distributors The interface between the public and the private network.
1 R&M FO Patch Panels Splice Version The convincing way to terminate fibers.

1 R&M FO Patch Panels Splice Version The convincing way to terminate fibers.
2x2 module & stave layouts. 2 options “Small chip” “Big chip” Boundary between “small” and “big” is determined by the 6” sensor wafer layout that must.

2x2 module & stave layouts. 2 options “Small chip” “Big chip” Boundary between “small” and “big” is determined by the 6” sensor wafer layout that must.
CALICE Dave Bailey. Aims and Objectives Develop the technology to build a high- resolution tracking calorimeter for ILC experiments Main thrusts: –Testbeam.

CALICE Dave Bailey. Aims and Objectives Develop the technology to build a high- resolution tracking calorimeter for ILC experiments Main thrusts: –Testbeam.
Ion source maintenance on the MAT 253

Ion source maintenance on the MAT 253
Copyright 2008 Kenneth M. Chipps Ph.D. www.chipps.com How to Terminate a Corning Unicam Connector Last Update 2008.08.18 1.1.0 1.

Copyright 2008 Kenneth M. Chipps Ph.D. How to Terminate a Corning Unicam Connector Last Update
Solenoid Pressure Regulator Check Valve Hand-turn Valve Pipe Clamp L-Bracket Mounting Block Plastic Tubing AN Fitting AN T-Fitting Pressure Sensor Base.

Solenoid Pressure Regulator Check Valve Hand-turn Valve Pipe Clamp L-Bracket Mounting Block Plastic Tubing AN Fitting AN T-Fitting Pressure Sensor Base.
C T A Camera Mechanics Rich Northrop University of Chicago 1 Design Review Argonne May 9, 2014 Final.

C T A Camera Mechanics Rich Northrop University of Chicago 1 Design Review Argonne May 9, 2014 Final.
1 IBL Stave & loading tools University of Geneva: G.Barbier, F.Cadoux, A.Clark, D.Ferrère, C.Husi, P. Iacobucci, M. Weber The main goal for today…  Review.

1 IBL Stave & loading tools University of Geneva: G.Barbier, F.Cadoux, A.Clark, D.Ferrère, C.Husi, P. Iacobucci, M. Weber The main goal for today…  Review.
Fiber Distribution Point for Underground VSOF-CS403A-SD Connector type Fiber Distribution Point.

Fiber Distribution Point for Underground VSOF-CS403A-SD Connector type Fiber Distribution Point.
ICE CUBE Shake test Mounting fixture workups Proposed test set up –06 Robin Lafever 03 June 2004 1.

ICE CUBE Shake test Mounting fixture workups Proposed test set up –06 Robin Lafever 03 June
V. Carassiti - Princeton (USA) 9-13/01/2003 1 BABAR IFR UPGRADE DETECTOR ASSEMBLING AND MOUNTING.

V. Carassiti - Princeton (USA) 9-13/01/ BABAR IFR UPGRADE DETECTOR ASSEMBLING AND MOUNTING.
AMS-02 tracker mechanics status of assembly and integration at UniGe Outer planes: - Tests of evaporator (cooling loop) integration - Tools to develop.

AMS-02 tracker mechanics status of assembly and integration at UniGe Outer planes: - Tests of evaporator (cooling loop) integration - Tools to develop.
AMS-02 tracker mechanics status of assembly and integration Inner tracker integration completion: - Assembly and cabling - Temperature and magnetic field.

AMS-02 tracker mechanics status of assembly and integration Inner tracker integration completion: - Assembly and cabling - Temperature and magnetic field.
MTF SLIT COMPONENTS Adjusting Blocks and Mounting Plate Steel Blocks

MTF SLIT COMPONENTS Adjusting Blocks and Mounting Plate Steel Blocks
Diamonds & R&D on Pigtails Howard Budd Sep 20 2007.

Diamonds & R&D on Pigtails Howard Budd Sep
Lathe.

Lathe.
Stave core assembly Stephanie Yang WP4 face to face meeting, Lancaster University 20 Feb 2014.

Stave core assembly Stephanie Yang WP4 face to face meeting, Lancaster University 20 Feb 2014.
Mechanical Work Plan Discussion Bill Cooper Fermilab.

Mechanical Work Plan Discussion Bill Cooper Fermilab.
Carbon-Epoxy Composite Base Plates for the PHOBOS Spectrometer Arms J.Michalowski, M.Stodulski The H.Niewodniczanski Institute of Nuclear Physics, Krakow.

Carbon-Epoxy Composite Base Plates for the PHOBOS Spectrometer Arms J.Michalowski, M.Stodulski The H.Niewodniczanski Institute of Nuclear Physics, Krakow.

Similar presentations

Ads by Google