1. Take 5 for Safety 10CFR851 and Electrical Equipment Installation

2. When Does 10CFR851 Apply?  DOE interpretation of 10CFR851: The great majority of the referenced standards contain language indicating that they apply to “design and construction” or, in the case of the National Electrical Code, “installations”–not to existing facilities or existing electrical systems. In addition, many of the standards clearly indicate that they are not intended to be applied retroactively.

3. More on 10CFR851  DOE indicates if the contractor is not installing …, then NFPA 70 does not apply  In addition, the enforcement guidance states that: Additions, alterations, or repairs to any building, structure, or premises shall conform to that required of a new building without requiring the existing building to comply with all the requirements of this code

4. OSHA and 10CFR851  When 10CFR851 went into effect, it made OSHA a referenced standard  On August 13, 2007, OSHA ruled that many electrical equipment rules are fully retroactive, and apply to particular types of installations regardless of when they were installed  This contrasts with the common practice of OSHA and many other regulators to “grandfather” facilities or operations in place when a regulatory requirement takes effect

5. OSHA Requirements Made Retroactive  Examination, installation, and use of equipment  Splices  Arcing parts  Marking  Identification of disconnecting means  Guarding of live parts 600 volts (V) or less  Grounding terminals and devices  Over current protection (600 V nominal or less)  Grounding systems, connections, path, supports  Grounding non-electrical equipment  Grounding methods for fixed equipment  Uses of flexible cords and cables  Splices for flexible cords and cables  …

6. US Naval Shipyard