Download presentation
Presentation is loading. Please wait.
Published byMerilyn Richards Modified over 9 years ago
1
Coolant Fill Coolant Check and Fill
2
Oil Fill & Dip Stick Main Engine Oil Fill Dip Stick Delo 400 – 40 wt. Engine Oil
3
Engine Oil Dipstick Not “Full Mark When Not Running Not Operating range when Not running When Operating Range When Running (Below 900 rpm)
4
Engine Oil Suction (Drain) Suction Connection
5
Reverse Gear (starboard side) Dipstick – Check When Not Running Dipstick – check when engine is NOT running Vent Oil Fill Plug – use 40 wt engine oil
6
Reverse Gear Dipstick Operating Range Check When Engine is NOT Running Fill With 40wt. Engine Oil
7
Generator Coolant Do Not Check When Hot
8
Generator Oil Fill & Dipstick Use 40 wt. Engine Oil Do Not Check when Running
9
Generator Dipstick Operating Range – “Check When Not Running”
10
Grey Water Tank Grey Water Tank ( 50 Gallons ) Grey Water Pump Switch
11
Fresh Water Tank Level Fill at the Yellow Mark Down about 250 Gallons
12
Fresh Water Fill (port side forward) 1” to ¾” Reducer is in the Equipment Room
13
Storage Tank Control Valves Forward Tank Valve Closed Main Tank Valve Closed (under engine room floor)
14
Day Tank Fuel Level Fill At The “RED” Mark
15
Foam Tank Valves (normally closed) Valves Normally Closed
16
Foam Tank Level (normally full) Level Normally Full Full
17
Battery Status Touch Screen
18
Compressed Air Status Touch Screen
19
Main Engine Brain Switches Main Engines Pump Engines Turn - on Mains every A.M. and Pumps as needed
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.