1. Demonstration of Software Interoperability based on the Industry Foundation Classes (IFC) from the International Alliance for Interoperability

2. Software Data Interoperability

3. IBPSA Demonstration Scenario oDisplay existing CAD drawing in Autodesk’s Architectural Desktop 2 (ADT2) oExport IFC data file from ADT2 oImport IFC data file into ArchiCAD oImport IFC geometry into EnergyPlus oImport IFC building structures into Olof Granlund’s LCA tool

4. Demonstration of Software Interoperability based on an International Data Model Standard

5. Software Data Interoperability

6. ASHRAE Demonstration Scenario oImport existing Standard data file into CAD Tool-1 oImport Standard geometry into Energy Simulation Tool-A oImport Standard geometry into Energy Simulation Tool-B oInput additional data required for Energy Simulation Tool-B oExport Standard data (IEQ targets) from Energy Tool-B oImport Standard data into Duct Design Tool oExport Standard duct geometry from Duct Design Tool oImport and display all Standard geometry in CAD Tool-2