1. OptiLine Mini-trunking Safe and smoothly shaped – and a joy to work with

2. Schneider Electric 2 - LSB03225 - May 2014 OptiLine Mini-trunking ●Wide range ●Safe and fast to install ●Robust and versatile ●PVC and halogen-free PC/ABS ●Aluminium ●IP40 ●Tamper-proof ●Impact-resistant

3. Schneider Electric 3 - LSB03225 - May 2014 Attractive and functional for all environments

4. Schneider Electric 4 - LSB03225 - May 2014 More than 40 years’ experience of designing trunking for electrical installations: ●Easy to install ●Maximum “buildability” ●Tamper-proof ●Modern design Many unique functions Trunking base and cover same width − good in corners Secure snap-function – can only be opened with tools Locking gives a high degree of protection Rounded shape – soft impression, more space inside Sturdy material gives high electrical safety. Trunking base and cover are both U- shaped. This increases stability and makes for easier handling. Concealed joints and high surface finish make cleaning easier Break line for removal of plastic cable shelf

5. Schneider Electric 5 - LSB03225 - May 2014 ●The range includes three sizes equipped with an integrated cable retaining function ●The flexible “wings” prevent cables from falling out during installation Integrated cable retaining function

6. Schneider Electric 6 - LSB03225 - May 2014 Single- or multiple compartment – for both power and data ●Mixed installations ●Power and low voltage wiring in the same multi-compartment trunking ●Easy to run long feeds OptiLine mini-trunking is available in 1-, 2- and 3-compartment versions

7. Schneider Electric 7 - LSB03225 - May 2014 ●Thanks to its sealed, stable design, OptiLine mini-trunking achieves degree of protection IP40. This makes OptiLine mini- trunking suitable for installation both outdoors and indoors. ●Both the plastic and the aluminium trunking offer many years of resistance to UV radiation, heat and cold. ●The plastic trunking is also approved for single-insulated wire outdoors. Both outdoors and indoors

8. Schneider Electric 8 - LSB03225 - May 2014 Environment-friendly ●OptiLine mini-trunking is available in three materials; aluminium, lead and cadmium- free PVC or halogen-free plastic (PC/ABS). ●Accessories, like corners and end pieces, are made of halogen-free plastic (PC/ABS).

9. Schneider Electric 9 - LSB03225 - May 2014 Highly impact-resistant ●All mini-trunking is highly impact-resistant, thanks to its design and generous material thickness. ●The aluminium version of OptiLine offers extra strong impact-resistance. In many cases, this is a secure substitute for unattractive sheet steel protection.

10. Schneider Electric 10 - LSB03225 - May 2014 Cable separation ● A unique feature of OptiLine mini-trunking is the cable separation at junctions in two- and three-compartment trunking. ●The flyover can easily be adapted to keep power and low voltage wiring separate. ●The cable holder (an accessory) keeps the cables in place during installation.

11. Schneider Electric 11 - LSB03225 - May 2014 Easy to cut ● The trunking and the partition walls can be hand with simple tools ● Accessories like corners, bends and joint cover pieces are very forgiving and hide all bad cuts.

12. Schneider Electric 12 - LSB03225 - May 2014 Tamper-proof ●The trunking and all its accessories use snap fitting for quick, simple installation. To remove the cover and accessories without the right tools is far more difficult. ●This is a design feature that protects the installation from tampering, especially recommended in public areas or for fibre optic and broadband cables.

13. Schneider Electric 13 - LSB03225 - May 2014 Screws or adhesive tape ●All OptiLine mini-trunking has pre- punched holes at frequent intervals to make installation easier. ●For installations without power wiring, there is also OptiLine mini-trunking with adhesive tape fixing. On suitable surfaces, the speed of this method of installation is unsurpassed.

14. Schneider Electric 14 - LSB03225 - May 2014 A complete mini-trunking system 1. Base profile 2. Cover 3. T-piece 4. Stop end 5. Branching piece 6. Internal corner 7. Joint cover piece 8. External corner 9. Bend 90° 10. Flyover 1 2 3 4 5 6 7 8 9 10

15. Schneider Electric 15 - LSB03225 - May 2014 Material, design and dimensions * Also available with bonding tape 12x2012x30 15x35 * Aluminium PVC PC/ABS * ** PVC ** With integrated cable retaining function PVC ** PVC

16. Schneider Electric 16 - LSB03225 - May 2014 Material, design and dimensions * Also available with bonding tape 18x20 18x3518x45 25x60 * Aluminium PVC Aluminium PVC PC/ABS * ** With integrated cable retaining function ** PVC

17. Schneider Electric 17 - LSB03225 - May 2014 System components Mini-trunking T-piece Joint cover piece Internal corner Bend 90° Branching piece External corner Stop end Fly-over Cable clamps Dedicated fixings Cutting shears

18. OptiLine Mini-trunking Smoothly shaped Safe Flexible