1. Torna alla prima pagina TensiNet Final Meeting Design Guide

2. Torna alla prima pagina Chapter 10

3. Torna alla prima pagina Introduction n Pre-fabricated elements for lightweight structures n Fabrication process

4. Torna alla prima pagina Membrane fabricator n Why do we need experienced and qualified manufecturers?

5. Torna alla prima pagina Manufacturing process n Cutting pattern determination and workshop drawings n Acquisition of fabric n Incoming goods inspection n Test of the material, test of the seams and biaxial tests for compensation factors n Cutting

6. Torna alla prima pagina Manufacturing process n Welding: HF for polystere PVC, hot bars for fiberglass PTFE or others n PTFE processing n Inspection prior to shipping expecially to check if the most important measurements of the main sections (borders, holes, seam length) are among the tolerances required

7. Torna alla prima pagina Packing and Transportation n Importance of accuracy in packing and transportation expecially for particular kind of fabrics as fiberglass coated PTFE

8. Torna alla prima pagina Erection n A particular stage of the whole process n Large span structures with few supporting elements n Trained erection team

9. Torna alla prima pagina Maintenance n Depends on many factors such as design,material, function, environmental conditions and so on n Cleaning, normally required expecially for poliestere PVC fabrics and for flat roofs

10. Torna alla prima pagina Maintenance n It is important to prevent or eliminate problems for corrosion, obstructed water drainage and ponding and check regularly the stress values of cables and membrane