1. New hydraulic 24V swing-leaf gates operator S450H FAAC International Workshop 2009 Rimini, Italy September 2009 by SAT

2. New FAAC swing-leaf gates hydraulic 24V operator: S450H September 2009 by SAT

3. Summary  Plus  Technical specifications September 2009 by SAT

4. Plus - 1/2 technology Easy to install For single-leaf up to 2 m for CBAC version or 3 m for SB version (with electrical lock) New SB flange New positive stop for opening and closing 1 2 3 4 5 September 2009 by SAT

5. 6 7 8 Faster rod linear speed, respect “old” hydraulic operator New tank without breath New Encoder bus in the equipment Plus - 2/2 September 2009 by SAT

6. 1 Hybrid technology Hydraulic technology + low voltage (24 v) The hybrid technology combines the advantages of both technologies: - Hydraulic technology : Torque, resistance, long life and duty cycle; - 24 V technology : high frequency use, easy speed and force control, backup battery unit September 2009 by SAT

7. Long stroke Operator 402 = 240 mm Operator 422 = 240 mm Operator 400 = 260 mm 2 Easy to install - 1/5 September 2009 by SAT Increased flexibility in the installation dimensions thanks to the very long stroke

8. 2 Easy to install - 2/5 Multi-position rear bracket The S450H operator includes multi-position bracket (three positions), that allows the operator to be installed in a wide range of pillar dimensions. The multi-position bracket can be welded or fixed by screws. September 2009 by SAT

9. 2 Easy to install - 3/5 D and B quotes The hole to be used depends on the D dimension, B dimension and  opening angle. September 2009 by SAT

10. 2 Easy to install - 4/5 D and B quotes September 2009 by SAT

11. 2 Easy to install - 5/5 Front bracket The front bracket can be welded or fixed by screws September 2009 by SAT

12. 3Max leaf length CBAC: 2 m SB: 3 m (with electrical lock) September 2009 by SAT

13. 4 NEW SB flange September 2009 by SAT Easy manual open/close The operator is free to be moved manually without having to be released. The new system realizes a “real” reversible operator: the force required for manual operation is very low. PATENTED

14. 4 NEW SB flange – operator at rest September 2009 by SAT PATENTED Controlled suction valve Suction valve PISTON

15. 4 NEW SB flange – operator in closing September 2009 by SAT PATENTED Controlled suction valve Suction valve

16. 4 NEW SB flange – operator in opening September 2009 by SAT PATENTED Controlled suction valve Suction valve

17. 5 Positive stop 11 spacers supplied for opening stop Each spacer is wide 6 mm September 2009 by SAT stops

18. 6 Faster piston rod 2,5 cm/sec with E124 2,0 cm/sec with E024S Operator 400 from 0.75 to 1.5 Cm/sec Operator 422 From 1 to 1.3 Cm/Sec (2 Cm/sec PED.) Operator 402 From 1 to 1.3 Cm/sec September 2009 by SAT

19. 7 Oil tank without breath - Tank totally sealed - The oil is not contaminated by external agents (dust, humidity) September 2009 by SAT Tank without breath

20. 8 Encoder bus Cover for additional protection and design Absolute encoder with very high resolution : < 0,1° September 2009 by SAT

21. Technical specifications S450H September 2009 by SAT