1. XE33OSA Chapter 21: The Linux System

2. 21.2XE33OSA Silberschatz, Galvin and Gagne ©2005 Chapter 21: The Linux System Linux History Design Principles Kernel Modules Process Management Scheduling Memory Management File Systems Input and Output Interprocess Communication Network Structure Security

3. 21.3XE33OSA Silberschatz, Galvin and Gagne ©2005 Objectives To explore the history of the UNIX operating system from which Linux is derived and the principles which Linux is designed upon To examine the Linux process model and illustrate how Linux schedules processes and provides interprocess communication To look at memory management in Linux To explore how Linux implements file systems and manages I/O devices

4. 21.4XE33OSA Silberschatz, Galvin and Gagne ©2005 History Linux is a modern, free operating system based on UNIX standards First developed as a small but self-contained kernel in 1991 by Linus Torvalds, with the major design goal of UNIX compatibility Its history has been one of collaboration by many users from all around the world, corresponding almost exclusively over the Internet It has been designed to run efficiently and reliably on common PC hardware, but also runs on a variety of other platforms The core Linux operating system kernel is entirely original, but it can run much existing free UNIX software, resulting in an entire UNIX- compatible operating system free from proprietary code Many, varying Linux Distributions including the kernel, applications, and management tools

5. 21.5XE33OSA Silberschatz, Galvin and Gagne ©2005 The Linux Kernel Version 0.01 (May 1991) had no networking, ran only on 80386- compatible Intel processors and on PC hardware, had extremely limited device-drive support, and supported only the Minix file system Linux 1.0 (March 1994) included these new features: Support for UNIX’s standard TCP/IP networking protocols BSD-compatible socket interface for networking programming Device-driver support for running IP over an Ethernet Enhanced file system Support for a range of SCSI controllers for high-performance disk access Extra hardware support Version 1.2 (March 1995) was the final PC-only Linux kernel

6. 21.6XE33OSA Silberschatz, Galvin and Gagne ©2005 Linux 2.0 Released in June 1996, 2.0 added two major new capabilities: Support for multiple architectures, including a fully 64-bit native Alpha port Support for multiprocessor architectures Other new features included: Improved memory-management code Improved TCP/IP performance Support for internal kernel threads, for handling dependencies between loadable modules, and for automatic loading of modules on demand Standardized configuration interface Available for Motorola 68000-series processors, Sun Sparc systems, and for PC and PowerMac systems 2.4 and 2.6 increased SMP support, added journaling file system, preemptive kernel, 64-bit memory support

7. 21.7XE33OSA Silberschatz, Galvin and Gagne ©2005 The Linux System Linux uses many tools developed as part of Berkeley’s BSD operating system, MIT’s X Window System, and the Free Software Foundation's GNU project The min system libraries were started by the GNU project, with improvements provided by the Linux community Linux networking-administration tools were derived from 4.3BSD code; recent BSD derivatives such as Free BSD have borrowed code from Linux in return The Linux system is maintained by a loose network of developers collaborating over the Internet, with a small number of public ftp sites acting as de facto standard repositories

8. 21.8XE33OSA Silberschatz, Galvin and Gagne ©2005 Linux Distributions Standard, precompiled sets of packages, or distributions, include the basic Linux system, system installation and management utilities, and ready-to-install packages of common UNIX tools The first distributions managed these packages by simply providing a means of unpacking all the files into the appropriate places; modern distributions include advanced package management Early distributions included SLS and Slackware Red Hat and Debian are popular distributions from commercial and noncommercial sources, respectively The RPM Package file format permits compatibility among the various Linux distributions

9. 21.9XE33OSA Silberschatz, Galvin and Gagne ©2005 Linux Licensing The Linux kernel is distributed under the GNU General Public License (GPL), the terms of which are set out by the Free Software Foundation Anyone using Linux, or creating their own derivative of Linux, may not make the derived product proprietary; software released under the GPL may not be redistributed as a binary-only product

10. 21.10XE33OSA Silberschatz, Galvin and Gagne ©2005 Design Principles Linux is a multiuser, multitasking system with a full set of UNIX- compatible tools Its file system adheres to traditional UNIX semantics, and it fully implements the standard UNIX networking model Main design goals are speed, efficiency, and standardization Linux is designed to be compliant with the relevant POSIX documents; at least two Linux distributions have achieved official POSIX certification The Linux programming interface adheres to the SVR4 UNIX semantics, rather than to BSD behavior

11. 21.11XE33OSA Silberschatz, Galvin and Gagne ©2005 Components of a Linux System

12. 21.12XE33OSA Silberschatz, Galvin and Gagne ©2005 Components of a Linux System (Cont.) Like most UNIX implementations, Linux is composed of three main bodies of code; the most important distinction between the kernel and all other components The kernel is responsible for maintaining the important abstractions of the operating system Kernel code executes in kernel mode with full access to all the physical resources of the computer All kernel code and data structures are kept in the same single address space

13. 21.13XE33OSA Silberschatz, Galvin and Gagne ©2005 Components of a Linux System (Cont.) The system libraries define a standard set of functions through which applications interact with the kernel, and which implement much of the operating-system functionality that does not need the full privileges of kernel code The system utilities perform individual specialized management tasks

14. 21.14XE33OSA Silberschatz, Galvin and Gagne ©2005 Kernel Modules Sections of kernel code that can be compiled, loaded, and unloaded independent of the rest of the kernel A kernel module may typically implement a device driver, a file system, or a networking protocol The module interface allows third parties to write and distribute, on their own terms, device drivers or file systems that could not be distributed under the GPL Kernel modules allow a Linux system to be set up with a standard, minimal kernel, without any extra device drivers built in Three components to Linux module support: module management driver registration conflict resolution

15. 21.15XE33OSA Silberschatz, Galvin and Gagne ©2005 Module Management Supports loading modules into memory and letting them talk to the rest of the kernel Module loading is split into two separate sections: Managing sections of module code in kernel memory Handling symbols that modules are allowed to reference The module requestor manages loading requested, but currently unloaded, modules; it also regularly queries the kernel to see whether a dynamically loaded module is still in use, and will unload it when it is no longer actively needed

16. 21.16XE33OSA Silberschatz, Galvin and Gagne ©2005 Driver Registration Allows modules to tell the rest of the kernel that a new driver has become available The kernel maintains dynamic tables of all known drivers, and provides a set of routines to allow drivers to be added to or removed from these tables at any time Registration tables include the following items: Device drivers File systems Network protocols Binary format

17. 21.17XE33OSA Silberschatz, Galvin and Gagne ©2005 Conflict Resolution A mechanism that allows different device drivers to reserve hardware resources and to protect those resources from accidental use by another driver The conflict resolution module aims to: Prevent modules from clashing over access to hardware resources Prevent autoprobes from interfering with existing device drivers Resolve conflicts with multiple drivers trying to access the same hardware

18. 21.18XE33OSA Silberschatz, Galvin and Gagne ©2005 Process Management UNIX process management separates the creation of processes and the running of a new program into two distinct operations. The fork system call creates a new process A new program is run after a call to execve Under UNIX, a process encompasses all the information that the operating system must maintain t track the context of a single execution of a single program Under Linux, process properties fall into three groups: the process’s identity, environment, and context

19. 21.19XE33OSA Silberschatz, Galvin and Gagne ©2005 Process Identity Process ID (PID). The unique identifier for the process; used to specify processes to the operating system when an application makes a system call to signal, modify, or wait for another process Credentials. Each process must have an associated user ID and one or more group IDs that determine the process’s rights to access system resources and files Personality. Not traditionally found on UNIX systems, but under Linux each process has an associated personality identifier that can slightly modify the semantics of certain system calls Used primarily by emulation libraries to request that system calls be compatible with certain specific flavors of UNIX

20. 21.20XE33OSA Silberschatz, Galvin and Gagne ©2005 Process Environment The process’s environment is inherited from its parent, and is composed of two null-terminated vectors: The argument vector lists the command-line arguments used to invoke the running program; conventionally starts with the name of the program itself The environment vector is a list of “NAME=VALUE” pairs that associates named environment variables with arbitrary textual values Passing environment variables among processes and inheriting variables by a process’s children are flexible means of passing information to components of the user-mode system software The environment-variable mechanism provides a customization of the operating system that can be set on a per-process basis, rather than being configured for the system as a whole

21. 21.21XE33OSA Silberschatz, Galvin and Gagne ©2005 Process Context The (constantly changing) state of a running program at any point in time The scheduling context is the most important part of the process context; it is the information that the scheduler needs to suspend and restart the process The kernel maintains accounting information about the resources currently being consumed by each process, and the total resources consumed by the process in its lifetime so far The file table is an array of pointers to kernel file structures When making file I/O system calls, processes refer to files by their index into this table

22. 21.22XE33OSA Silberschatz, Galvin and Gagne ©2005 Process Context (Cont.) Whereas the file table lists the existing open files, the file-system context applies to requests to open new files The current root and default directories to be used for new file searches are stored here The signal-handler table defines the routine in the process’s address space to be called when specific signals arrive The virtual-memory context of a process describes the full contents of the its private address space

23. 21.23XE33OSA Silberschatz, Galvin and Gagne ©2005 Processes and Threads Linux uses the same internal representation for processes and threads; a thread is simply a new process that happens to share the same address space as its parent A distinction is only made when a new thread is created by the clone system call fork creates a new process with its own entirely new process context clone creates a new process with its own identity, but that is allowed to share the data structures of its parent Using clone gives an application fine-grained control over exactly what is shared between two threads

24. 21.24XE33OSA Silberschatz, Galvin and Gagne ©2005 Scheduling The job of allocating CPU time to different tasks within an operating system While scheduling is normally thought of as the running and interrupting of processes, in Linux, scheduling also includes the running of the various kernel tasks Running kernel tasks encompasses both tasks that are requested by a running process and tasks that execute internally on behalf of a device driver As of 2.5, new scheduling algorithm – preemptive, priority-based Real-time range nice value

25. 21.25XE33OSA Silberschatz, Galvin and Gagne ©2005 Relationship Between Priorities and Time- slice Length

26. 21.26XE33OSA Silberschatz, Galvin and Gagne ©2005 List of Tasks Indexed by Priority

27. 21.27XE33OSA Silberschatz, Galvin and Gagne ©2005 Kernel Synchronization A request for kernel-mode execution can occur in two ways: A running program may request an operating system service, either explicitly via a system call, or implicitly, for example, when a page fault occurs A device driver may deliver a hardware interrupt that causes the CPU to start executing a kernel-defined handler for that interrupt Kernel synchronization requires a framework that will allow the kernel’s critical sections to run without interruption by another critical section

28. 21.28XE33OSA Silberschatz, Galvin and Gagne ©2005 Kernel Synchronization (Cont.) Linux uses two techniques to protect critical sections: 1.Normal kernel code is nonpreemptible (until 2.4) – when a time interrupt is received while a process is executing a kernel system service routine, the kernel’s need_resched flag is set so that the scheduler will run once the system call has completed and control is about to be returned to user mode 2.The second technique applies to critical sections that occur in an interrupt service routines – By using the processor’s interrupt control hardware to disable interrupts during a critical section, the kernel guarantees that it can proceed without the risk of concurrent access of shared data structures

29. 21.29XE33OSA Silberschatz, Galvin and Gagne ©2005 Kernel Synchronization (Cont.) To avoid performance penalties, Linux’s kernel uses a synchronization architecture that allows long critical sections to run without having interrupts disabled for the critical section’s entire duration Interrupt service routines are separated into a top half and a bottom half. The top half is a normal interrupt service routine, and runs with recursive interrupts disabled The bottom half is run, with all interrupts enabled, by a miniature scheduler that ensures that bottom halves never interrupt themselves This architecture is completed by a mechanism for disabling selected bottom halves while executing normal, foreground kernel code

30. 21.30XE33OSA Silberschatz, Galvin and Gagne ©2005 Interrupt Protection Levels Each level may be interrupted by code running at a higher level, but will never be interrupted by code running at the same or a lower level User processes can always be preempted by another process when a time-sharing scheduling interrupt occurs

31. 21.31XE33OSA Silberschatz, Galvin and Gagne ©2005 Process Scheduling Linux uses two process-scheduling algorithms: A time-sharing algorithm for fair preemptive scheduling between multiple processes A real-time algorithm for tasks where absolute priorities are more important than fairness A process’s scheduling class defines which algorithm to apply For time-sharing processes, Linux uses a prioritized, credit based algorithm The crediting rule factors in both the process’s history and its priority This crediting system automatically prioritizes interactive or I/O- bound processes

32. 21.32XE33OSA Silberschatz, Galvin and Gagne ©2005 Process Scheduling (Cont.) Linux implements the FIFO and round-robin real-time scheduling classes; in both cases, each process has a priority in addition to its scheduling class The scheduler runs the process with the highest priority; for equal- priority processes, it runs the process waiting the longest FIFO processes continue to run until they either exit or block A round-robin process will be preempted after a while and moved to the end of the scheduling queue, so that round-robing processes of equal priority automatically time-share between themselves

33. 21.33XE33OSA Silberschatz, Galvin and Gagne ©2005 Symmetric Multiprocessing Linux 2.0 was the first Linux kernel to support SMP hardware; separate processes or threads can execute in parallel on separate processors To preserve the kernel’s nonpreemptible synchronization requirements, SMP imposes the restriction, via a single kernel spinlock, that only one processor at a time may execute kernel-mode code

34. 21.34XE33OSA Silberschatz, Galvin and Gagne ©2005 Memory Management Linux’s physical memory-management system deals with allocating and freeing pages, groups of pages, and small blocks of memory It has additional mechanisms for handling virtual memory, memory mapped into the address space of running processes Splits memory into 3 different zones due to hardware characteristics

35. 21.35XE33OSA Silberschatz, Galvin and Gagne ©2005 Relationship of Zones and Physical Addresses on 80x86

36. 21.36XE33OSA Silberschatz, Galvin and Gagne ©2005 Splitting of Memory in a Buddy Heap

37. 21.37XE33OSA Silberschatz, Galvin and Gagne ©2005 Managing Physical Memory The page allocator allocates and frees all physical pages; it can allocate ranges of physically-contiguous pages on request The allocator uses a buddy-heap algorithm to keep track of available physical pages Each allocatable memory region is paired with an adjacent partner Whenever two allocated partner regions are both freed up they are combined to form a larger region If a small memory request cannot be satisfied by allocating an existing small free region, then a larger free region will be subdivided into two partners to satisfy the request Memory allocations in the Linux kernel occur either statically (drivers reserve a contiguous area of memory during system boot time) or dynamically (via the page allocator) Also uses slab allocator for kernel memory

38. 21.38XE33OSA Silberschatz, Galvin and Gagne ©2005 21.07

39. 21.39XE33OSA Silberschatz, Galvin and Gagne ©2005 Virtual Memory The VM system maintains the address space visible to each process: It creates pages of virtual memory on demand, and manages the loading of those pages from disk or their swapping back out to disk as required The VM manager maintains two separate views of a process’s address space: A logical view describing instructions concerning the layout of the address space  The address space consists of a set of nonoverlapping regions, each representing a continuous, page-aligned subset of the address space A physical view of each address space which is stored in the hardware page tables for the process

40. 21.40XE33OSA Silberschatz, Galvin and Gagne ©2005 Virtual Memory (Cont.) Virtual memory regions are characterized by: The backing store, which describes from where the pages for a region come; regions are usually backed by a file or by nothing (demand-zero memory) The region’s reaction to writes (page sharing or copy-on-write) The kernel creates a new virtual address space 1.When a process runs a new program with the exec system call 2. Upon creation of a new process by the fork system call

41. 21.41XE33OSA Silberschatz, Galvin and Gagne ©2005 Virtual Memory (Cont.) On executing a new program, the process is given a new, completely empty virtual-address space; the program-loading routines populate the address space with virtual-memory regions Creating a new process with fork involves creating a complete copy of the existing process’s virtual address space The kernel copies the parent process’s VMA descriptors, then creates a new set of page tables for the child The parent’s page tables are copied directly into the child’s, with the reference count of each page covered being incremented After the fork, the parent and child share the same physical pages of memory in their address spaces

42. 21.42XE33OSA Silberschatz, Galvin and Gagne ©2005 Virtual Memory (Cont.) The VM paging system relocates pages of memory from physical memory out to disk when the memory is needed for something else The VM paging system can be divided into two sections: The pageout-policy algorithm decides which pages to write out to disk, and when The paging mechanism actually carries out the transfer, and pages data back into physical memory as needed

43. 21.43XE33OSA Silberschatz, Galvin and Gagne ©2005 Virtual Memory (Cont.) The Linux kernel reserves a constant, architecture-dependent region of the virtual address space of every process for its own internal use This kernel virtual-memory area contains two regions: A static area that contains page table references to every available physical page of memory in the system, so that there is a simple translation from physical to virtual addresses when running kernel code The reminder of the reserved section is not reserved for any specific purpose; its page-table entries can be modified to point to any other areas of memory

44. 21.44XE33OSA Silberschatz, Galvin and Gagne ©2005 Executing and Loading User Programs Linux maintains a table of functions for loading programs; it gives each function the opportunity to try loading the given file when an exec system call is made The registration of multiple loader routines allows Linux to support both the ELF and a.out binary formats Initially, binary-file pages are mapped into virtual memory Only when a program tries to access a given page will a page fault result in that page being loaded into physical memory An ELF-format binary file consists of a header followed by several page- aligned sections The ELF loader works by reading the header and mapping the sections of the file into separate regions of virtual memory

45. 21.45XE33OSA Silberschatz, Galvin and Gagne ©2005 Memory Layout for ELF Programs

46. 21.46XE33OSA Silberschatz, Galvin and Gagne ©2005 Static and Dynamic Linking A program whose necessary library functions are embedded directly in the program’s executable binary file is statically linked to its libraries The main disadvantage of static linkage is that every program generated must contain copies of exactly the same common system library functions Dynamic linking is more efficient in terms of both physical memory and disk-space usage because it loads the system libraries into memory only once

47. 21.47XE33OSA Silberschatz, Galvin and Gagne ©2005 File Systems To the user, Linux’s file system appears as a hierarchical directory tree obeying UNIX semantics Internally, the kernel hides implementation details and manages the multiple different file systems via an abstraction layer, that is, the virtual file system (VFS) The Linux VFS is designed around object-oriented principles and is composed of two components: A set of definitions that define what a file object is allowed to look like  The inode-object and the file-object structures represent individual files  the file system object represents an entire file system A layer of software to manipulate those objects

48. 21.48XE33OSA Silberschatz, Galvin and Gagne ©2005 The Linux Ext2fs File System Ext2fs uses a mechanism similar to that of BSD Fast File System (ffs) for locating data blocks belonging to a specific file The main differences between ext2fs and ffs concern their disk allocation policies In ffs, the disk is allocated to files in blocks of 8Kb, with blocks being subdivided into fragments of 1Kb to store small files or partially filled blocks at the end of a file Ext2fs does not use fragments; it performs its allocations in smaller units  The default block size on ext2fs is 1Kb, although 2Kb and 4Kb blocks are also supported Ext2fs uses allocation policies designed to place logically adjacent blocks of a file into physically adjacent blocks on disk, so that it can submit an I/O request for several disk blocks as a single operation

49. 21.49XE33OSA Silberschatz, Galvin and Gagne ©2005 Ext2fs Block-Allocation Policies

50. 21.50XE33OSA Silberschatz, Galvin and Gagne ©2005 The Linux Proc File System The proc file system does not store data, rather, its contents are computed on demand according to user file I/O requests proc must implement a directory structure, and the file contents within; it must then define a unique and persistent inode number for each directory and files it contains It uses this inode number to identify just what operation is required when a user tries to read from a particular file inode or perform a lookup in a particular directory inode When data is read from one of these files, proc collects the appropriate information, formats it into text form and places it into the requesting process’s read buffer

51. 21.51XE33OSA Silberschatz, Galvin and Gagne ©2005 Input and Output The Linux device-oriented file system accesses disk storage through two caches: Data is cached in the page cache, which is unified with the virtual memory system Metadata is cached in the buffer cache, a separate cache indexed by the physical disk block Linux splits all devices into three classes: block devices allow random access to completely independent, fixed size blocks of data character devices include most other devices; they don’t need to support the functionality of regular files network devices are interfaced via the kernel’s networking subsystem

52. 21.52XE33OSA Silberschatz, Galvin and Gagne ©2005 Device-Driver Block Structure

53. 21.53XE33OSA Silberschatz, Galvin and Gagne ©2005 Block Devices Provide the main interface to all disk devices in a system The block buffer cache serves two main purposes: it acts as a pool of buffers for active I/O it serves as a cache for completed I/O The request manager manages the reading and writing of buffer contents to and from a block device driver

54. 21.54XE33OSA Silberschatz, Galvin and Gagne ©2005 Character Devices A device driver which does not offer random access to fixed blocks of data A character device driver must register a set of functions which implement the driver’s various file I/O operations The kernel performs almost no preprocessing of a file read or write request to a character device, but simply passes on the request to the device The main exception to this rule is the special subset of character device drivers which implement terminal devices, for which the kernel maintains a standard interface

55. 21.55XE33OSA Silberschatz, Galvin and Gagne ©2005 Interprocess Communication Like UNIX, Linux informs processes that an event has occurred via signals There is a limited number of signals, and they cannot carry information: Only the fact that a signal occurred is available to a process The Linux kernel does not use signals to communicate with processes with are running in kernel mode, rather, communication within the kernel is accomplished via scheduling states and wait.queue structures

56. 21.56XE33OSA Silberschatz, Galvin and Gagne ©2005 Passing Data Between Processes The pipe mechanism allows a child process to inherit a communication channel to its parent, data written to one end of the pipe can be read a the other Shared memory offers an extremely fast way of communicating; any data written by one process to a shared memory region can be read immediately by any other process that has mapped that region into its address space To obtain synchronization, however, shared memory must be used in conjunction with another Interprocess-communication mechanism

57. 21.57XE33OSA Silberschatz, Galvin and Gagne ©2005 Shared Memory Object The shared-memory object acts as a backing store for shared-memory regions in the same way as a file can act as backing store for a memory- mapped memory region Shared-memory mappings direct page faults to map in pages from a persistent shared-memory object Shared-memory objects remember their contents even if no processes are currently mapping them into virtual memory

58. 21.58XE33OSA Silberschatz, Galvin and Gagne ©2005 Network Structure Networking is a key area of functionality for Linux. It supports the standard Internet protocols for UNIX to UNIX communications It also implements protocols native to nonUNIX operating systems, in particular, protocols used on PC networks, such as Appletalk and IPX Internally, networking in the Linux kernel is implemented by three layers of software: The socket interface Protocol drivers Network device drivers

59. 21.59XE33OSA Silberschatz, Galvin and Gagne ©2005 Network Structure (Cont.) The most important set of protocols in the Linux networking system is the internet protocol suite It implements routing between different hosts anywhere on the network On top of the routing protocol are built the UDP, TCP and ICMP protocols

60. 21.60XE33OSA Silberschatz, Galvin and Gagne ©2005 Security The pluggable authentication modules (PAM) system is available under Linux PAM is based on a shared library that can be used by any system component that needs to authenticate users Access control under UNIX systems, including Linux, is performed through the use of unique numeric identifiers (uid and gid) Access control is performed by assigning objects a protections mask, which specifies which access modes—read, write, or execute—are to be granted to processes with owner, group, or world access

61. 21.61XE33OSA Silberschatz, Galvin and Gagne ©2005 Security (Cont.) Linux augments the standard UNIX setuid mechanism in two ways: It implements the POSIX specification’s saved user-id mechanism, which allows a process to repeatedly drop and reacquire its effective uid It has added a process characteristic that grants just a subset of the rights of the effective uid Linux provides another mechanism that allows a client to selectively pass access to a single file to some server process without granting it any other privileges

62. XE33OSA End of Chapter 21