Download presentation
Presentation is loading. Please wait.
Published byDana Byrd Modified over 8 years ago
1
Earthquakes Earth Science
3
What is an Earthquake? A vibration of the Earth produced by a rapid energy release The point within the earth where an earthquake starts is called the focus Energy travels from the focus in all directions- think of a stone being tossed into a pond Stone sets waves of motion in water just as seismic waves move through earth The point on the surface of the Earth above the focus is called the epicenter
4
The Epicenter The epicenter is the location directly above the focus
5
Earthquakes over a 10 yr. period Pacific Ring of fire
6
Faults Faults are fractures in the Earth where plate movement has occurred There are three types of forces that create faults. Compression - squeezes Tension - stretches Shear – causes slippage Each of these three forces can create a different kind of fault.
7
Earthquake causes Elastic Rebound hypothesis Rock is bending causing elastic stress Eventually the rock will slip and break at the weakest point (the focus) The vibrations we feel occur as the rock returns to its original shape
8
Types of faults Normal Faults- caused by tension forces Reverse Faults- compression Strike-Slip Faults- shear forces
9
Normal Faults Tension causes rocks to be pulled apart. Rock above the fault surface moves downward in relation to rock below the fault surface. Can help to form mountains such as the Sierra Nevada Mountain Range
10
Reverse Fault Compression causes rock to break. Rocks above the fault surface are forced up and over the rocks below the faults. Can form mountains such as the Rockies.
11
Strike-Slip Fault Two of Earth’s plates move past each other due to shear forces. There is very little vertical movement Ex: San Andreas Fault
12
Earthquake Info Seismic waves – waves that move through the Earth’s crust Seismic waves travel outward from the focus of an earthquake Surface Waves- these travel along Earth’s outer layer Body waves- travel through Earth’s interior Primary Waves (P) – waves that travel in the same direction the wave is moving Secondary Waves (S) – move through the Earth causing particles to move at right angles to the direction of the wave.
15
Wave Facts Surface waves (S) are the slowest waves, primary (P Waves) are the fastest. P Waves can only travel through solids. P waves travel 1.7 times faster than S waves Surface waves cause the most destruction during an earthquake.
16
Measuring Earthquakes Seismologists use seismographs to measure earthquakes. The more energy that an earthquake releases, the greater its magnitude. One of the largest earthquakes occurred in Haiti very recently and killed over 200,000 people
17
Finding the Epicenter- Distance Remember P Waves travel faster than S waves The greater the distance between the P wave and S wave the farther the source 1) find the time interval between the first P wave and first S wave using the seismogram 2) use the graph to find distance from the seismogram
18
Finding the Epicenter- Direction Can use 3 or more seismograms to do this Create a circle using direction found on graph Where circles intersect is the exact location of the epicenter
19
Richter Earthquakes are ranked on the Richter Scale – measures amount of energy released 1-10 For each increase of 1.0, amplitude of the largest surface wave is 10 times greater About 32 times as much energy is released
20
Tsunami Means “Harbor Wave” If an earthquake happens underwater, it can create a huge wave. This wave travels to the surface After it reaches the surface, it can spread out for thousands of kilometers in every direction As the wave approaches the shore, it can form a towering crest that can reach 30m high.
21
Earthquake Safety Be prepared – know if an area has had earthquakes in the past or if it is near a pate boundary. Make your home earthquake safe Take heavy objects down from high shelves Hot water heaters and gas appliances should be securely in place During earthquakes, stay away from windows or anything that could fall on you.
22
Living on a Fault Seismic Safe structures Resistant to vibrations Buildings with bases of alternating rubber and steel can withstand quakes of up to 8.3 on the Richter scale without major damage Buildings and highways can be made so they will bend but not break Seismic safe structures are more expensive to build than regular structures.
23
More Earthquake Damage Anchorage, Alaska 1964 – Magnitude 9.2
29
Oakland, CA 1989
30
Northridge, CA 1994 – 62 killed
31
Former hospital in Mexico City 1985 – Magnitude 8.1 with 7.5 aftershock 18 hours later
32
Turkey 1999
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.