1. Let’s Loom!

2. Introduction to Looming Let’s watch this tutorial on loom knitting basics…

3. How to: Cast on a knit on a circular loom We need: 1 knitting loom 1 knitting tool Yarn

4. 1. Begin by wrapping a few inches of yarn tightly on the outside peg. 2. Start on the first peg to the right. 3. Go around/behind the peg and back around to the front. 4. Move to the next peg. 5. Start on the right side of the peg, go around/behind the peg and back around to the front. 6. Continue this until you reach the last peg. Step by Step:

5. LET’S TRY!

6. 1.Start on the first peg again. 2.Continue around keeping the yarn above the previous strand. 3.Keep the same direction. 4.Once you reach the last peg, wrap the yarn around the outside peg. 5.Hold the yarn. 6.Starting at the first peg, take the knitting tool, go under the bottom stitch, pull it over the top stitch, and pull it behind the peg. 7.Continue this all the way around. 8.Push the top strand down before starting the next stitch. 9.Once you go all the way around, start with the peg right of the outside peg, use your knitting tool to pull the bottom strand over the top strand to the back of the peg. 10. Repeat process until you reach your desired length. Step by Step Continued: