Presentation is loading. Please wait.

Presentation is loading. Please wait.

Lukasz Krzempek TE-VSC-DLM 28th WP8 Bi-weekly meeting Tuesday, 24 November 2015 Vacuum layout (Experimental side)

Published bySamantha Stokes Modified over 8 years ago

Similar presentations

Presentation on theme: "Lukasz Krzempek TE-VSC-DLM 28th WP8 Bi-weekly meeting Tuesday, 24 November 2015 Vacuum layout (Experimental side)"— Presentation transcript:

1 Lukasz Krzempek TE-VSC-DLM 28th WP8 Bi-weekly meeting Tuesday, 24 November 2015 Vacuum layout (Experimental side)

2 Lukasz Krzempek TE-VSC-DLM 1 24.11.2015 Current vacuum layout TAS Gate valve assembly TAS side VAX-BPM assembly Gate valve assembly Chamber side

3 Lukasz Krzempek TE-VSC-DLM 2 24.11.2015 VAX-BPM assembly 740[mm]-frame length 1275[mm]-from bellow to bellow (installation length of bellows) 2078[mm]-from TAS wall to bellow’s quick flange

4 Lukasz Krzempek TE-VSC-DLM 3 24.11.2015 Gate valve assembly - TAS sideGate valve assembly - IR side

5 Lukasz Krzempek TE-VSC-DLM 4 24.11.2015 General view - ATLAS experiment Different position of Angle valves for ATLAS and CMS

6 Lukasz Krzempek TE-VSC-DLM 5 24.11.2015 Horizontal position of angle valves determined by given envelope – ATLAS experiment Front view Top view

7 Lukasz Krzempek TE-VSC-DLM 6 24.11.2015 Side view of vacuum layout – ATLAS experiment Gate valve from IR side intended to install on chamber support On-going studies on another solution aiming to avoid bellows and its compressing mechanisms -> valves directly attached to TAS and exp. vacuum chambers Envelope length available for ATLAS vacuum layout – 1789[mm]

8 Vacuum layout from ATLAS experiment fitted in envelope available for CMS detector Lukasz Krzempek TE-VSC-DLM 7 24.11.2015 Horizontal position for angle valves not possible in CMS layout

9 Lukasz Krzempek TE-VSC-DLM 8 24.11.2015 General view and modifications of vacuum layout - CMS experiment ! Vertical position of angle valves for CMS experiment Next slide

10 Assumed 6[mm] gap between head of angle valve and VAX-BPM support to ease maintenance Lukasz Krzempek TE-VSC-DLM 9 24.11.2015 Modification of vacuum layout - CMS experiment New vertical position for angle valves demands 25[mm] extension of tube equipped with bellow and actuator

11 Lukasz Krzempek TE-VSC-DLM 10 24.11.2015 Vertical position of angle valves determined by given envelope – CMS experiment Front view Top view

12 Lukasz Krzempek TE-VSC-DLM 11 24.11.2015 Side view of vacuum layout – CMS experiment Up to date design shows handling issues - transport Envelope length available for CMS vacuum layout – 2048[mm]

13 Lukasz Krzempek TE-VSC-DLM 12 24.11.2015 3d models: ST0725893 – CMS ST0723775 - ATLAS

Download ppt "Lukasz Krzempek TE-VSC-DLM 28th WP8 Bi-weekly meeting Tuesday, 24 November 2015 Vacuum layout (Experimental side)"

Similar presentations

Tagger and Vacuum Chamber Assembly Procedure. Outline. Assembly procedure for tagger and vacuum chamber. Support stands. Alignment.

Tagger and Vacuum Chamber Assembly Procedure. Outline. Assembly procedure for tagger and vacuum chamber. Support stands. Alignment.
19th – 20th of September 2007Cryogenic Expert Meeting at GSI, Jan Patrick Meier1/11 Cryogenic Experts Meeting at GSI, 2007 The SIS 100 Cryogenic Jumper.

19th – 20th of September 2007Cryogenic Expert Meeting at GSI, Jan Patrick Meier1/11 Cryogenic Experts Meeting at GSI, 2007 The SIS 100 Cryogenic Jumper.
ATD Assembly. ATD Assembly #1 Dewar Assembly #1 Status: Dewar has been completely assembled and vacuum tested. No vacuum leaks were detected on the outer.

ATD Assembly. ATD Assembly #1 Dewar Assembly #1 Status: Dewar has been completely assembled and vacuum tested. No vacuum leaks were detected on the outer.
MICE Collaboration meeting at RAL 26 th Oct ~ 29 th Oct, 2004 Wrap up on Radiation Shielding Module Design Stephanie Yang 26 th October, 2004.

MICE Collaboration meeting at RAL 26 th Oct ~ 29 th Oct, 2004 Wrap up on Radiation Shielding Module Design Stephanie Yang 26 th October, 2004.
Test Chamber Assembly, 1.5M Long (59.00”) Vacuum Tube, 4.00 OD x 3.50 ID Vacuum Tube, 3.75 OD x 3.51 ID 3.375” CFF, Non-Rotatable Feedthrough, Ceramtec.

Test Chamber Assembly, 1.5M Long (59.00”) Vacuum Tube, 4.00 OD x 3.50 ID Vacuum Tube, 3.75 OD x 3.51 ID 3.375” CFF, Non-Rotatable Feedthrough, Ceramtec.
Update on Q1 TAS REGION (18 to 22m), layouts. D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting1.

Update on Q1 TAS REGION (18 to 22m), layouts. D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting1.
The HiLumi LHC Design Study is included in the High Luminosity LHC project and is partly funded by the European Commission within the Framework Programme.

The HiLumi LHC Design Study is included in the High Luminosity LHC project and is partly funded by the European Commission within the Framework Programme.
V. Carassiti - Princeton (USA) 9-13/01/2003 1 BABAR IFR UPGRADE DETECTOR ASSEMBLING AND MOUNTING.

V. Carassiti - Princeton (USA) 9-13/01/ BABAR IFR UPGRADE DETECTOR ASSEMBLING AND MOUNTING.
Tagger and Vacuum Chamber Assembly Procedure. Preassembly of second bottom yokes and poleshoes. a) Install special support. b) Place the second bottom.

Tagger and Vacuum Chamber Assembly Procedure. Preassembly of second bottom yokes and poleshoes. a) Install special support. b) Place the second bottom.
Update of the ARIES-CS Power Core Configuration and Maintenance Presented by X.R. Wang Contributors: S. Malang, A.R. Raffray and the ARIES Team ARIES.

Update of the ARIES-CS Power Core Configuration and Maintenance Presented by X.R. Wang Contributors: S. Malang, A.R. Raffray and the ARIES Team ARIES.
Tagger and Vacuum Chamber Design. Outline. Design considerations. Stresses and deformations. Mechanical assembly.

Tagger and Vacuum Chamber Design. Outline. Design considerations. Stresses and deformations. Mechanical assembly.
MICE Collaboration Meeting March 29 - April 1, 2004 -- CERN MICE alignment, tolerances and supports Tuesday March 30 Room 17-1-007 Edgar Black/IIT March17-

MICE Collaboration Meeting March 29 - April 1, CERN MICE alignment, tolerances and supports Tuesday March 30 Room Edgar Black/IIT March17-
13 Dec. 2004 MAC Review – Future IR Heating Issues 1 Future IR Heating Issues 13 December 2004 Stan Ecklund.

13 Dec MAC Review – Future IR Heating Issues 1 Future IR Heating Issues 13 December 2004 Stan Ecklund.
1 Presented at ColUSM by D. Ramos on behalf of the Cold Collimator Feasibility Study Working Group https://espace.cern.ch/CCFS/default.aspx Longitudinal.

1 Presented at ColUSM by D. Ramos on behalf of the Cold Collimator Feasibility Study Working Group Longitudinal.
7/28/03P. Kroon AEROGEL Assembly of Cells into 80-cell Array: –8 cells wide by 10 cells high - 1204 mm high (Y) by 2077 mm wide (Z) by about 335 mm deep.

7/28/03P. Kroon AEROGEL Assembly of Cells into 80-cell Array: –8 cells wide by 10 cells high mm high (Y) by 2077 mm wide (Z) by about 335 mm deep.
Tagger and Vacuum Chamber Design. Outline. Design considerations. Stresses and deformations. Mechanical assembly.

Tagger and Vacuum Chamber Design. Outline. Design considerations. Stresses and deformations. Mechanical assembly.
LINAC 4 Project L4T/L4Z Design Status J.Humbert / B.Riffaud on behalf of EN-MME design team 1 st September 2011 LINAC4 – BEAM COORDINATION COMMITTEE B.Riffaud.

LINAC 4 Project L4T/L4Z Design Status J.Humbert / B.Riffaud on behalf of EN-MME design team 1 st September 2011 LINAC4 – BEAM COORDINATION COMMITTEE B.Riffaud.
1 ILD/CMS Engineering Meeting M. Joré – ILD integration philosophy Integration philosophy of ILD Matthieu Joré – January 21st Integration of the subdetectors.

1 ILD/CMS Engineering Meeting M. Joré – ILD integration philosophy Integration philosophy of ILD Matthieu Joré – January 21st Integration of the subdetectors.
Undulator Orientation & Electron Beam Spacing Should the undulator frames be toward the central aisle or the tunnel walls? What is the optimum spacing.

Undulator Orientation & Electron Beam Spacing Should the undulator frames be toward the central aisle or the tunnel walls? What is the optimum spacing.
News on mechanics Photon veto F. Raffaelli INFN – Sezione di Pisa CERN, January r 02 th, 2010 -Status of tender Anti 2-3-4-5 -Status of the supporting.

News on mechanics Photon veto F. Raffaelli INFN – Sezione di Pisa CERN, January r 02 th, Status of tender Anti Status of the supporting.

Similar presentations

Ads by Google