1. IOT POLY ENGINEERING 2-17 January 27, 2010 Clear your desk space of everything but a blank sheet of notebook paper and a pencil. 1.Each of the following slides contains your quiz questions. You will have the time allotted per slide to LETTER your answers. 2.Just LETTER the number/letter and your answer – complete sentences are NOT required. 3.LETTER your title block correctly. QUIZ Technical Graphic Communication BPI-IOT QUIZ 27 JAN 10 LAST, F. 1

2. IOT POLY ENGINEERING 2-17 QUIZ – Slide 1 Technical Graphic Communication 1.Write the correct name for each drawing type next to the correct letter on your paper. A B C D E F G 1.5 MINUTES

3. IOT POLY ENGINEERING 2-17 QUIZ – Slide 2 Technical Graphic Communication 2.Write the correct name for each reference plane next to the correct letter on your paper. Use ENTIRE name, not the acronym. A B C D 1 MINUTE

4. IOT POLY ENGINEERING 2-17 QUIZ – Slide 3 Technical Graphic Communication 3.Write the correct NAME and WEIGHT for each line type next to the correct letter on your paper: 2.5” A B C D E F G 1.5 MINUTES

5. QUIZ – Slide 4 Technical Graphic Communication 4.Give an example of something a designer would scale up for drawing. 5.Give an example of something a designer would scale down for drawing. 6.If a point on an object is 14’-3” away from the frontal reference plane in the front view and 7’-6” away from the horizontal reference plane in the front view, how far away is the point from the frontal reference plane in the right side view? 7.To draw what type of drawing would designers use more than one position for any reference plane? 1.5 MINUTES

6. IOT POLY ENGINEERING 2-17 Without talking, put your pencils down and pass in your papers. ORTHOGRAPHIC PROJECTIONS Technical Graphic Communication

7. IOT POLY ENGINEERING 2-17 Due by end of class today Use spacing of.5” between views for second Orthographic Projection ORTHOGRAPHIC PROJECTIONS Technical Graphic Communication