Presentation is loading. Please wait.

Presentation is loading. Please wait.

© 2006 Cisco Systems, Inc. All rights reserved.Presentation_ID 1 CME 4.2 Feature: Push-To-Talk (PTT) Nick Matthews Customer Support Engineer.

Similar presentations


Presentation on theme: "© 2006 Cisco Systems, Inc. All rights reserved.Presentation_ID 1 CME 4.2 Feature: Push-To-Talk (PTT) Nick Matthews Customer Support Engineer."— Presentation transcript:

1 © 2006 Cisco Systems, Inc. All rights reserved.Presentation_ID 1 CME 4.2 Feature: Push-To-Talk (PTT) Nick Matthews Customer Support Engineer

2 © 2006 Cisco Systems, Inc. All rights reserved.Cisco ConfidentialPresentation_ID 2 Agenda  PTT  Configuration  Debugs  Q and A  Issues

3 © 2006 Cisco Systems, Inc. All rights reserved.Cisco ConfidentialPresentation_ID 3 Push To Talk  Can be used for quick communication between workers that commonly call each other  Also useful for broadcasting to external speakers  User is immediately sent to audio without ringing delay Allows for 7921 user to have Walkie-Talkie behavior

4 © 2006 Cisco Systems, Inc. All rights reserved.Cisco ConfidentialPresentation_ID 4 Requirements  Phone load must be 1.0.4 or later  Supported after CME 4.2 .cnf file for phone must include service phone thumbButton1 PTTH6 This setting can be set globally under telephony-service, and is case-sensitive PTTHX is the parameter, where X is the button number configured (up to 6 on 7921s)

5 © 2006 Cisco Systems, Inc. All rights reserved.Cisco ConfidentialPresentation_ID 5 PTT Call Flow ephone 1 type 7921 button 1:1 6:10 ephone-dn 10 intercom 1050 ephone-dn 50 number 1050 paging 2) Held to offhook on button 6 (dn 10) 1) Thumb button 3) Intercom line automatically dials 1050, a paging number 4) All phones configured with ‘paging-dn 50’ receive one-way voice path from ephone 1 5) ephone 1 hears “zipzip” tone and begins talking Diagram From 4.3 NPI

6 © 2006 Cisco Systems, Inc. All rights reserved.Cisco ConfidentialPresentation_ID 6 Configuration ephone 14 type 7921 button 1:1 6:24 ! ephone-dn 24 number 270 intercom 1080 ! ephone-dn 31 number 1080 paging ! ephone 5 type 7961 button 1:2 paging-dn 31 telephony-service service phone thumbButton1 PTTH6 !

7 © 2006 Cisco Systems, Inc. All rights reserved.Cisco ConfidentialPresentation_ID 7 Debugs 000641: Jun 30 23:54:58.780: ephone-14[8]:StimulusMessage 9 (6) From ephone 13 000644: Jun 30 23:54:58.780: ephone-14[8][SEP001F6C7A37C6]:LineButtonPress 6 000646: Jun 30 23:54:58.780: ephone-14[8]:SpeakerPhoneOffHook 000677: Jun 30 23:54:58.780: SkinnyGetCallState for DN 24 chan 1 SIEZE 000690: Jun 30 23:54:58.792: ephone-14[8][SEP001F6C7A37C6]:AutoDial to 1080 000764: Jun 30 23:54:58.808: ephone-14[8]:SkinnyUpdateCState activeLine 6 chan 1 DN 24 ref 24 000772: Jun 30 23:54:58.808: SkinnyGetCallState for DN 24 chan 1 ALERTING 000833: Jun 30 23:54:59.832: ephone-14[8]:Send StopTone for parche/seaview phones before OpenReceive 000873: Jun 30 23:54:59.836: SkinnyGetCallState for DN 24 chan 1 CONNECTED 000920: Jun 30 23:55:00.624: Skinny StartTone 49 sent on ephone socket [8] DtZipZip 000941: Jun 30 23:55:00.824: ephone-14[8]:SkinnyTryCall to 1080 instance 1 start at 0 secondary 000947: Jun 30 23:55:01.888: ephone-14[8][SEP001F6C7A37C6]:ONHOOK (from phone msgID=7)

8 © 2006 Cisco Systems, Inc. All rights reserved.Cisco ConfidentialPresentation_ID 8 Show Commands nicmatth-sip#show call active voice brief 126D : 53 109932750ms.1 +1070 pid:20023 Answer 270 active dur 00:00:41 tx:1980/63360 rx:2021/40420 Tele 50/0/24 (53) [50/0/24.0] tx:39600/39600/0ms g711ulaw noise:0 acom:0 i/0:0/0 dBm 126D : 54 109932760ms.1 +1050 pid:20030 Originate 1080 active dur 00:00:41 tx:0/0 rx:0/0 Tele 50/0/31 (54) [50/0/31.0] tx:0/0/0ms g711ulaw noise:0 acom:0 i/0:0/0 dBm nicmatth-sip(config)#do sh voice call summ PORT CODEC VAD VTSP STATE VPM STATE ============== ========= === ==================== ====================== 50/0/23.2 - - - EFXS_ONHOOK 50/0/24.1 g711ulaw n S_CONNECT EFXS_CONNECT 50/0/31.1 g711ulaw n S_CONNECT EFXS_CONNECT

9 © 2006 Cisco Systems, Inc. All rights reserved.Cisco ConfidentialPresentation_ID 9 Troubleshooting  Check DN configuration – intercom configuration and that the receiving phone has paging-dn # configured  The service phone thumbButton1 PTTH6 is configured, and the capitalization is correct –Also check the ephone-dn for the type command –Create cnf

10 © 2006 Cisco Systems, Inc. All rights reserved.Cisco ConfidentialPresentation_ID 10 Q and A

11 © 2006 Cisco Systems, Inc. All rights reserved.Cisco ConfidentialPresentation_ID 11


Download ppt "© 2006 Cisco Systems, Inc. All rights reserved.Presentation_ID 1 CME 4.2 Feature: Push-To-Talk (PTT) Nick Matthews Customer Support Engineer."

Similar presentations


Ads by Google