1. Lab 01: AEV Project Introduction Advanced Energy Vehicle (AEV)

2. Introduction Example AEV AEVs are small (< 500grams), autonomous, electric motor- powered, propeller-driven vehicles that are suspended from and maneuver along a monorail track systems hung from the laboratory ceilings

3. AEV Project Objectives  Project Management and Teamwork Time management, task scheduling, communication, etc.  Design Process and Cycle Identifying requirements/constraints, brainstorming, initial designs, build/test/analyze, final design, etc.  Project Documentation Project notebook, design review phase documents, final reports, extra credit video, etc.

4. AEV Design Cycle

5. AEV Project Objective (Problem Definition) INITIAL CONCEPTS (Brainstorming) EXPERIMENTAL RESEARCH ANALYZE DESIGN DECISION RESEARCH COMPARE FINAL DESIGN Present AEV Design PT 1 PT 2 PT 3 PT 4 (System Analysis)(Programming)

6. AEV Design Review Phases  Demonstrate the design process through a series of review phases  A design review is described as a: "documented, comprehensive examination of the design to evaluate the adequacy of the design requirements“ The Mission Concept Review (MCR) is an example of an early review phase; and, in this case, is provided.

7. AEV Design Review Phases Procedure  AEV design teams will demonstrate the design by: 1.Understanding the Mission Concept Review (MCR) to create an AEV to complete mission objectives and to meet design constraints 2.Developing Test Readiness Review Documents (TRR) to demonstrate that the team is prepared to meet the Performance Test Objectives 3.Developing a Preliminary Design Review Document (PDR) from laboratory tests and Performance Test 1 4.Developing a Critical (Final) Design Review Document (CDR) from detailed investigations in design, including the PDR, and Performance Tests 2-4

8. AEV Design Review Phases Overview Mission Concept Review (MCR) Test Readiness Review: Performance Test 1 Preliminary Design Review (PDR) Test Readiness Reviews: Performance Test 2-4: Critical Design Review (CDR)  Mission Concept Review (provided)  Final Documentation

9. AEV Components Handout: 1.AEV Kits 2.DISCLAIMER for replacement of lost or damaged kits

10. AEV Components  Classroom Components Desktop Tracks Li-PO Battery and Chargers  Kit Components  AEV-Kit  Automatic Control System  Structure Pieces  Hardware  Electric Motors  Propellers  Monorail wheels  Hand Tools These components are to stay in the classroom at ALL times

11. AEV Components  Tracks: Desktop Classroom Final Testing Final Test and Competition Tracks  Desktop Track  Each desk has a desktop stand to use throughout the AEV design process  Classroom Track  The laboratory has suspended track(s) for design and operational testing

12. AEV Components  Tracks: Desktop Classroom Final Test Track Final Test and Competition Tracks  Final Test Track  Classroom track slightly modified  Details are in the Mission Concept Review

13. AEV Structure and Wheels  AEV  Structure and Wheels  Propulsion System  Energy Storage  Automatic Controller  Motor Driver  Aerodynamic Bodies AEV Components AEV structure AEV Wheel AEV Reflective Sensor

14. AEV Propulsion System  AEV  Structure and Wheels  Propulsion System  Energy Storage  Automatic Controller  Motor Driver  Aerodynamic Bodies Brushless Electric Motor 2.5” and 3”, Diameter Propellers AEV Components

15. AEV Energy Storage  AEV  Structure and Wheels  Propulsion System  Energy Storage  Automatic Controller  Motor Driver  Aerodynamic Bodies 2-Cell Lithium-Polymer Battery Capacity: 800mAh Voltage: 7.4V (nominal) AEV Components

16. AEV Automatic Control System  AEV  Structure and Wheels  Propulsion System  Energy Storage  Automatic Controller  Motor Driver  Aerodynamic Bodies Motor Driver Arduino Nano USB AEV Components

17. AEV Aerodynamic Body Components OPTIONAL  AEV  Structure and Wheels  Propulsion System  Energy Storage  Automatic Controller  Motor Driver  Aerodynamic Bodies OPTIONAL components for AEV Design Home-built or Team Bought Innovative thought encouraged AEV Components

18. AEV Aerodynamic Body Components OPTIONAL  AEV  Structure and Wheels  Propulsion System  Energy Storage  Automatic Controller  Motor Driver  Aerodynamic Bodies AEV Components 3D Printing Laser Cutting

19. Mission Concept Review

20. AEV Lab Report Format

21. Technical Communication Guide  The GRADING GUIDELINES for each lab which will tell which type of report format to follow.  Follow the Technical Communications Guide (Tech Comm Guide) found on the EEIC Course Website.  Make sure to have the appropriate header or cover page with the necessary information!  Remember to use past tense, third person, and also spell check the document before handing in!

22. Questions?