Download presentation
Presentation is loading. Please wait.
Published byPrudence Willis Modified over 9 years ago
1
Meteors Members: Ahn Soo Young Jee Myeong Keun Jee Myeong Keun Diego Širola Diego Širola Slaven Mišak Slaven Mišak Team leader: Nikola Strah Scientific advisors: Goran Zgrablić Izidor Pelajić Nikola Biliškov Izidor Pelajić Nikola Biliškov
2
Goals Meteor observation RadioVideoVisualELF
3
Meteors: -small particles of dust -up to 50m in diameter -circle the Sun – meteor streams Background
4
Radio observation Goal: -detect a signal from a station far far away (more than 800 km) (forward scattering) (forward scattering) -record the signal through the night -analyze the recorded data Meteor Group Lab TV station Prague Ionization trail
5
Equipment - Yagi antenna - iCom IC-PCR1000 receiver - Computer and Humanware
6
Details iCom IC-PCR1000 receiver Frequency 49.7396 MHz TV station in Prague, output power 150 kW, distance 544 km, video and audio signal recorded PC computer Pentium 3 Data recording, reduction and analysis performed with CoolEdit & Audacity software, sampling rate 11087 Hz Yagi antenna in the dark Digging the hole for the antenna
7
Results 13h of raw data to be processed 10 minutes of actual meteor recordings
9
Visual observation Plan: -gather few hours of observations -send report to IMO -calculate ZHR
10
Results - Few hours of observation - Reports sent to IMO - ZHR calculated for all observations - Observed showers: - Perseides - Southern δ Aquarides - κ Cygnides ZHR:-κ Cygnides- 1.day 3 2.day 40 2.day 40 3.day 41 3.day 41
11
ELF Goals: Record a meteor signal in ELF band (0- 300 Hz)Record a meteor signal in ELF band (0- 300 Hz)
12
Equipment ELF orb 50 Hz filter DC filter and appropriate software NI DAQmx SCB-68 and appropriate software
13
Schematics Electrometer 50 Hz cutoff 150 Hz cutoff Low pass DC Filter NI DAQmx SCB-68 PC with acquisition software made in LabView 7.1
14
Results equipment testing Signal from the electrometer Signal from the electrometer when electrometer was grounded
15
Without the grounding With the grounding - We used Slaven for grounding purposes
16
Signal recorded
17
FFT calculated using LabView programmed software and CoolEdit Frequency Analysis
18
Video Goal: Simultaniousley record the sky with video camera combined with radio & visual observation for analisys.Simultaniousley record the sky with video camera combined with radio & visual observation for analisys.
19
Equipment Watec WAT-902H CCD camera DC power supply- founded and thoroughly tested Video capture card MetRec and Meteoder software
20
Results - Video capture card (Meteor II) doesn’t work - Camera works - DC power supply is operating “First light” from camera- tested on video monitor from the control room of the observatory
21
THE END Thank you for your attention! Any questions?
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.