2.  Shut off unused lights  Shut off unused electronics  Turn on fans to lower A/C usage

3.  Turn on any device plugged into designated outlets  Turn on any light via remote control  Control electronics & lights via internet

4.  Home status settings  Alerts user of unexpected entrance  Captures photo of those entering

6.  All devices will operate in sleep mode while not executing instructions  When a signal is sent, it will trigger an interrupt in the device and execute the instructions  Once the instruction has been executed, the device will go back into sleep mode  Main Processor will route instructions to correct controller based on sensor inputs

7.  MSP430G2231  Stellaris LM3S8962  Panasonic NaPiOn series Passive Infrared Motion Sensor  TI CC1150 RF Transmitter  TI CC113L Receiver

17.  E- Electronics Sensor  T – Temperature Sensor  L – Lighting Sensor  M – Main Processor

18.  Increased Security through use of cameras  Increased Energy-efficiency through smart devices for high power consuming household electronics  Increased User Control through improved interface