1. FarmVisit GIS For use with MapWindow 4.7.5 Form Supported By:

2. To use FarmVisit GIS 1.Create/Open a new project with the Project Manager 2.Load your county data 3.Locate a farm's location 4.Add a new farm 5.Open the PA Agriculture Outreach Form and enter the appropriate data.

3. Project Manger

4. Load County Data

5. Locate a Farm's Location Use a combination of the provided data layers along with USGS Topos and Aerial Photos. Use provided FarmVisit Tools –Topo Tool: –Aerial Tool:

6. Add a New Farm 1.To create a new FarmVisit site, select the Add FarmVisit Site tool. 2.Click on the map where you want to place the FarmVisit site.

7. PA Agriculture Outreach Form 1.To record the PA Agricultural Outreach Form for a given FarmVisit site, select the FarmVisit Data Form tool. 2.Click an existing FarmVisit site. 3.Enter the information into its corresponding location. Note that the Farm ID is the concatonation of the County FIPS code, the Municipality FIPS code, and a sequential counter for each farm in a particular municipality. For example, the Farm ID for the first farm (1) recorded in Southampton township (FIPS = 932) in Bedford county (FIPS = 05) would be 05_932_1.

8. PA Agriculture Outreach Form