1. SENIOR DESIGN 11/13

2. http://www.cadsoft.de/

3. NEW PROJECT -> NEW SCHEMATIC Control Panel

4. NEW PROJECT -> NEW SCHEMATIC Schematic Window

5. NEW PROJECT -> NEW SCHEMATIC Tool Palette

6. NEW PROJECT -> NEW SCHEMATIC Edit / Draw Menus same as tool palette

7. NEW PROJECT -> NEW SCHEMATIC Edit / Draw Menus same as tool palette

8. NEW PROJECT -> NEW SCHEMATIC Edit / Draw Menus same as tool palette

9. NEW PROJECT -> NEW SCHEMATIC Menus

10. Some are only available in board view Tool Menu

11. Library / Window Menu

14. Discrete Library! (standard resistors, LEDs etc..), Supply, Atmel) Libraries limited with freeware version, but can be downloaded in addition (free as well).

18. autorouter ERC ratsnest DRC

19. Adding New Parts to a Library: Library -> Open (as opposed to “use) -> choose one or create new: 1: Symbols: These are the symbols that show up on a schematic 2: Packages: (DIP, SMD etc.., resistor size..) footprint on board. 3: Device: (actual part, electric rules etc..).

20. -> Add symbol

21. -> Add Package.-> Add package

22. Combine Gates + package into device. http://myhome.spu.edu/bolding/EE4211/EagleTutorial4.htm

23. You don’t have to you use Arduino for your projects -STK500.