Presentation is loading. Please wait.

Presentation is loading. Please wait.

Characterization of CsI:Tl recrystalization after liquid phase deposition Ulrik Lund Olsen, Ph.D. student supervisors: H.F. Poulsen, S. Schmidt SCINT’07,

Published byHilary Flynn Modified over 9 years ago

Similar presentations

Presentation on theme: "Characterization of CsI:Tl recrystalization after liquid phase deposition Ulrik Lund Olsen, Ph.D. student supervisors: H.F. Poulsen, S. Schmidt SCINT’07,"— Presentation transcript:

1 Characterization of CsI:Tl recrystalization after liquid phase deposition Ulrik Lund Olsen, Ph.D. student supervisors: H.F. Poulsen, S. Schmidt SCINT’07, Salem Winston, June 4-8 2007

2 Aims of project Diffracted Beam Grain in Aluminum Sample Scintillator Mirror Microscope Lens CCD photons 540nm X-rays 50keV Submicron grains structure resolved at high energy (30-100keV) at fast kinetic low flux diffraction meassurements. fundamental relationship between scintillator thickness and resolution

3 Principle - Structured Scintillator CsI:Tl SiO2 Si

4 Electrochemical etching HF solution etches surfaces with positive donors Light induced donors are guided by an applied electric field Field determined by silicon resistivity and bias HF e- + + + R.L. Smith and J.D. Collins, J. Appl. Phys. 71, 8, R1 (1992)

5 Pore Structure 10µm 1µm SiO2

6 Pore Filling Process CsI:Tl powder on Silicon surface Sealed sample holder Tube furnace Controlled cooling rate

7 Bulk characterization Focused Ion Beam(FIB) milling 4µm 10µm Ions

8 Crystal characterization - EBSD Grain size Distribution Electron Backscatter Diffraction

9 Compositional characterization - Fluorescence Flourescence exited with 90keV synchrotron radiation: local (w/ focused beam) large lead(Pb) background Au Sn Kβ1Kβ1 Kβ1Kβ1 Kα1Kα1 Kα1Kα1 Kα2Kα2 fit

10 Compositional characterization - PIXE Particle induced X-ray Emission: 40keV protons bulk information (250µm penetration) global probe (2mm 2 beam)

11 Compositional characterization - PIXE manufacturers specs on as-received was 0.2 wt% (GB crystals)

12 Composition characterization - SIMS Secondary Ion Mass Spectroscopy: local information surface probing high compositional sensitivity (>ppm) uneven sensitivity to different species No.Ion CentMass CI 1I 126.8895 434 2Cs 132.8742 564067 3^203Tl 203.0080 1069 4Tl 205.0127 1362 5Cs_2 265.7874 170843

13 Conclusion Multiple characterization tools needed textural information from high resolution EBSD absolute composition from PIXE meso-scale relative composition from x-ray induced fluorescence local composition – SIMS Thanks to: T. Martin (ESRF) V. Honkimaki (ESRF) M. di Michiel (ESRF) X. Badel (KTH) J. Linnros (KTH) N.B. Larsen (RISØ) J.C. Grivel (RISØ) C. Gundlach (ESRF) Funding: Danish Fundamental Research Foundation &

Download ppt "Characterization of CsI:Tl recrystalization after liquid phase deposition Ulrik Lund Olsen, Ph.D. student supervisors: H.F. Poulsen, S. Schmidt SCINT’07,"

Similar presentations

Focused ion beam (FIB) 1.Overview. 2.Ion source and optics. 3.Ion-solid interaction, damage. 4.Scanning ion beam imaging. ECE 730: Fabrication in the nanoscale:

Focused ion beam (FIB) 1.Overview. 2.Ion source and optics. 3.Ion-solid interaction, damage. 4.Scanning ion beam imaging. ECE 730: Fabrication in the nanoscale:
Ion Beam Analysis techniques:

Ion Beam Analysis techniques:
Electron Microscopy for Catalyst Characterization Dr. King Lun Yeung Department of Chemical Engineering Hong Kong University of Science and Technology.

Electron Microscopy for Catalyst Characterization Dr. King Lun Yeung Department of Chemical Engineering Hong Kong University of Science and Technology.
Formation of pn junction in deep silicon pores September 2002 By Xavier Badel, Jan Linnros, Martin Janson, John Österman Department of Microelectronics.

Formation of pn junction in deep silicon pores September 2002 By Xavier Badel, Jan Linnros, Martin Janson, John Österman Department of Microelectronics.
PROVIDED BY EMAD BEHDAD SPECIALIZED PROTECTION AND CORROSION OF MATERIALS LECTURERS H.MONAJATI,PHD JAFARI,PHD ISLAMIC AZAD UNIVERSITY OF NAJAFABAD BARANCH.

PROVIDED BY EMAD BEHDAD SPECIALIZED PROTECTION AND CORROSION OF MATERIALS LECTURERS H.MONAJATI,PHD JAFARI,PHD ISLAMIC AZAD UNIVERSITY OF NAJAFABAD BARANCH.
Tomsk Polytechnic University1 A.S. Gogolev A. P. Potylitsyn A.M. Taratin.

Tomsk Polytechnic University1 A.S. Gogolev A. P. Potylitsyn A.M. Taratin.
Introduction Superconductors are a class of material that when cooled to low temperatures, conduct electricity with zero resistance. The main use of superconductors.

Introduction Superconductors are a class of material that when cooled to low temperatures, conduct electricity with zero resistance. The main use of superconductors.
3D X-Ray Diffraction Microscopy Larry Margulies. 200 µm Metal Structures Heat Defor- mation 200 µm 5 µm Challenges: - Multiple lengthscales - Heterogeneities.

3D X-Ray Diffraction Microscopy Larry Margulies. 200 µm Metal Structures Heat Defor- mation 200 µm 5 µm Challenges: - Multiple lengthscales - Heterogeneities.
XPS and SIMS MSN 506 Notes.

XPS and SIMS MSN 506 Notes.
X-ray Microtomography National School on Neutron and X-ray Scattering August 14-28 2005 Group D Jiong Hua Vaibhav Kohli Soonjoo Seo Lu Zou Paul J. Sideris.

X-ray Microtomography National School on Neutron and X-ray Scattering August Group D Jiong Hua Vaibhav Kohli Soonjoo Seo Lu Zou Paul J. Sideris.
Surface Characterization by Spectroscopy and Microscopy

Surface Characterization by Spectroscopy and Microscopy
Spectroscopy FNI 1C.

Spectroscopy FNI 1C.
SEM microscope By: Doug, Holly & Oleg. Scanning Electron Microscope vs. Optical Microscope Advantages Continuously variable magnification High resolution.

SEM microscope By: Doug, Holly & Oleg. Scanning Electron Microscope vs. Optical Microscope Advantages Continuously variable magnification High resolution.
Do it with electrons !. Microscopy Structure determines properties We have discussed crystal structure (x-ray diffraction) But consider now different.

Do it with electrons !. Microscopy Structure determines properties We have discussed crystal structure (x-ray diffraction) But consider now different.
Detectors The energy loss of particles in matter can be used detect and identify those particles. There are different types of “detectors”: - Gas-filled.

Detectors The energy loss of particles in matter can be used detect and identify those particles. There are different types of “detectors”: - Gas-filled.
Neutron Generation and Detection Lee Robertson Instrument & Source Division Oak Ridge National Laboratory 17 th National School on Neutron and X-ray Scattering.

Neutron Generation and Detection Lee Robertson Instrument & Source Division Oak Ridge National Laboratory 17 th National School on Neutron and X-ray Scattering.
Seminar Author: Bojan Hiti Mentor: doc. dr. Matjaž Kavčič Determination of trace impurities on Si wafers with x-ray fluorescence.

Seminar Author: Bojan Hiti Mentor: doc. dr. Matjaž Kavčič Determination of trace impurities on Si wafers with x-ray fluorescence.
Scanning Electron Microscopy

Scanning Electron Microscopy
III. Analytical Aspects Summary Cheetham & Day, Chapters 2, 3 Chemical Characterization of Solid-State Materials Chemical Composition: Bulk, Surface, …

III. Analytical Aspects Summary Cheetham & Day, Chapters 2, 3 Chemical Characterization of Solid-State Materials Chemical Composition: Bulk, Surface, …
Surface Analysis Surface interface controls many aspects of chemistry

Surface Analysis Surface interface controls many aspects of chemistry

Similar presentations

Ads by Google