2. Choose a category. You will be given the answer. You must give the correct question. Click to begin.

3. Click here for Final Jeopardy

4. DetailsPast Units 1Past Units 2 10 Point 20 Points 30 Points 40 Points 50 Points 10 Point 20 Points 30 Points 40 Points 50 Points 30 Points 40 Points 50 Points MiscellaneousWall Sections

5. This is the common wall type that starts with an F

6. What is Frame Wall?

7. This is the variation on brick walls

8. What is Brick Veneer Wall?

9. This is the wall type that is a combination of two others

10. What is Brick and Concrete Block?

11. This is the type of dimension you never put on a wall section

12. What is Horizontal?

13. These are the three details that make up a wall section

14. What are Footing, Sill, and Cornice?

15. This is the detail that shows the footing and the foundation wall

16. What is the footing detail?

17. This is the detail that shows the fireplace

18. What is the fireplace detail?

19. This is the detail that shows the intersection of the roof and the wall

20. What is cornice detail?

21. This is the detail that shows construction on the foundation

22. What is sill detail?

23. These are the second most important sheets in your Architectural Plans

24. What are the architectural details?

25. This is the concrete volume that your foundation wall sits atop

26. What is the footing?

27. These are the notes you write on Architectural Details

28. What are Annotations?

29. This is the scale range that details may have

30. What is ½” to full scale?

31. This is how you determine the width of your footing

32. What is twice the width of your foundation wall?

33. If you want to do a door detail from your elevation view in REVIT, what command do you use in the view ribbon?

34. What is “Call Out”?

35. This is the number of pages in your cover letter

36. What is one?

37. This is the number of resumes you should make if you are applying to 7 architectural jobs

38. What is one?

39. These two tools can be used to draw circles

40. What are the compass and the circle template?

41. This should always be used to fill out a job application

42. What is a pen?

43. You always ask for this at the end of a cover letter

44. What is an interview?

45. This is the unit for resistance

46. What is Ohms?

47. This is the wire that connects your building to the power lines

48. What is the service drop?

49. This is the kind of outlet that should be put outdoors

50. What is weatherproof?

51. This is the type of outlet that should be put near sinks

52. What is GFCI? (Ground Fault Circuit Interrupted)

53. This symbol stands for…

54. What is a duplex outlet?

55. Make your wager

56. Final Answer

57. Final Question