1. 1 PTT 105/3: Engineering Graphics

2. TAXONOMY OF PLANAR GEOMETRIC PROJECTIONS PTT 105/3: Engineering Graphics 2 Planar Geometric Projections Parallel Multiview orthographic AxonometricIsometricDimetricTrimetricObliquePerspective1 point2 point3 point

3. Parallel Projection PTT 105/3: Engineering Graphics 3

4. Perspective Projection PTT 105/3: Engineering Graphics 4

5. Orthographic Projection PTT 105/3: Engineering Graphics 5 Projectors are orthogonal to projection surface

6. Orthographic Projection PTT 105/3: Engineering Graphics 6 Advantages and disadvantages Preserves both distance and angle - shapes are preserved - can be used for measurements:  Building plans  Manufactured parts Cannot see what object really looks like because many surfaces hidden from view. - often we add the isometric

7. Multiview Orthographic Projection PTT 105/3: Engineering Graphics 7 Projection plane parallel to principle face In CAD and architecture, we often display three multiviews plus isometric.

8. Axonometric Projections PTT 105/3: Engineering Graphics 8 Move the projection plane relative to object Classify by how many angles of a corner of a projected cube are the equal to each other. Types of axonometric projections:  Three angle equals: isometric  Two angle equals: dimetric  None angle equal: trimetric

9. 1. ISOMETRIC PROJECTION isometric The isometric projection has a standard orientation that makes it the typical projection used in CAD. 30° In an isometric projection, the width and depth dimensions are sketched at 30° above horizontal. In an isometric projection all angles between the axonometric axes are equal. This results in the three angles at the upper front corner of the cube being equal to 120°. The three sides of the cube are also equal, leading to the term iso (equal) -metric (measure). 9 PTT 105/3: Engineering Graphics

10. Isometric drawings work quite well for objects of limited depth. However, an isometric drawing distorts the object when the depth is significant. In this case, a pictorial perspective drawing is better. 10 PTT 105/3: Engineering Graphics

11. 2. DIMETRIC PROJECTION PTT 105/3: Engineering Graphics 11 In a dimetric projection two of the objects axes make equal angles with the plane of projection and the third angle is larger or smaller than the other two.

12. 3. TRIMETRIC PROJECTION trimetric In general, the trimetric projection offers more flexibility in orienting the object in space. In a trimetric projection no two axes make equal angles with the plane of projection. The width and depth dimensions are at arbitrary angles to the horizontal, and the three angles at the upper front corner of the cube are unequal. 12 PTT 105/3: Engineering Graphics

13. This makes the three sides of the cube each have a different length as measured in the plane of the drawing; hence the name tri-metric. In most CAD software, the trimetric projection fixes one side along a horizontal line and tips the cube forward. Generally, small manufactured objects are adequately represented by isometric or trimetric views. 13 PTT 105/3: Engineering Graphics

14. Axonometric Projections PTT 105/3: Engineering Graphics 14 Advantages and Disadvantages Lines are scaled (foreshortening) – can find scaling factor but can’t measure distance directly. Parallel lines preserved but angles are not Can see three principal faces of box-like object Some optical illusions possible - parallel lines appear to diverge Does not look real because far objects are scaled the same as near objects Used in CAD applications

15. Oblique Projection PTT 105/3: Engineering Graphics 15 An OBLIQUE projection is one in which the projectors are other than perpendicular to the plane of projection. Figure below shows the same object in both orthographic and oblique projections. The oblique projection: - shows the front surface and the top surface, which includes three dimensions: length, width, and height. Therefore, an oblique projection is one way to show all three dimensions of an object in a single view.

16. PERSPECTIVE PROJECTION perspective A simply perspective (pictorial perspective) projection is drawn so that parallel lines converge towards a single point, unlike isometric or trimetric projections where parallel lines remain parallel. This has the effect that distant objects appear smaller than nearer objects. A perspective projection is quite useful in providing a realistic image of an object when the object spans a long distance such as the view of a bridge, railways or aircraft from one end. 16 PTT 105/3: Engineering Graphics

17. PERSPECTIVE PROJECTION PTT 105/3: Engineering Graphics 17

18. Differences between 3D and 2D Criteria3D2D 1. Viewing Direction- Look at your object from an angle - Look straight down on the drawing plane 2. Object Created- have depth- No depth 3. Command related- 80 AutoCAD commands related primarily to 3D - however, are also useful in 2D 4. Constructing object- Yes-No. -Drawing picture from different views 18 PTT 105/3: Engineering Graphics

19. 3D Term Frequently Used 3D objects made in AutoCAD called models 2D work referred to as drawing/drafting Model 19 PTT 105/3: Engineering Graphics

20. 4 types of model used in 3D PTT 105/3: Engineering Graphics 20 Wireframe Model Surface Model Solid ModelRendering Model

21. Object by its edges only Wireframe cannot hide object that are behind them Hole has no meaning in a wireframe model because there is nothing in which to make a hole 1. Wireframe Model 21 PTT 105/3: Engineering Graphics

22. Surface model often use wireframe models as a frame for their surfaces Surface model: part wireframe + part surface 2. Surface Model 22 PTT 105/3: Engineering Graphics

23. Wireframe, surface model & computer- calculated mass; eg: volume, centre of gravity, mass moment of inertia Solid models look like wireframe unless a hidden line removal command is in effect 3. Solid Model 23 PTT 105/3: Engineering Graphics

24. Shaded, realistic-looking picture of a surface solid model is called a rendering Two type: Grayscale rendering Fully capable of colour rendering 4. Rendering 24 PTT 105/3: Engineering Graphics

25. Reasons For Using 3D Good for verifying design as well as for use in presentation and documentation as well. Show design more clearly Closer to representing real object than a 2D 25 PTT 105/3: Engineering Graphics

26. 3D Capabilities of AutoCAD 1. AutoCAD has complete 3D coordinate system for specifying points and drawing objects anywhere in space 2. To assist in point input and for working in local area, AutoCAD has a movable user coordinate system 3. It can set viewpoints from any location in space that can look in any directions 4. The computer screen can be divided into multiple viewports for simultaneously viewing 3D space from different viewpoints and different direction 26 PTT 105/3: Engineering Graphics

27. 5. AutoCAD has a good assortment of surface entities for making surface models that have a variety of shapes 6. Solid models of most objects typically manufactured in machine shop can be made within AutoCAD 7. 3D models can be transformed into standard multi- view, dimensioned production drawing 8. AutoCAD has a built-in renderer with lights and surface materials, capable of making realistic-looking shaded picture from 3D models 27 PTT 105/3: Engineering Graphics

28. EPT 112/3: Introduction to Engineering 28