1. Training : M5+SAC844+Lock
Dec,2014 by Sophy

2. Content
1.Wiring Diagram.
2.How to make Fingerprint/Card work.

3. M5 Pin Definition 1.Tamper alarm:
Used with third party controller. To detect the reader is connected or removed.
2. Anviz Wiegand Switch:
If connect it with GND, wiegand out will be Anviz wiegand, which is Device id.
(1)M5+SC011: must connect .
(2)M5+SAC844: do not connect.
3. Status LED:
Used with third party controller. Indicate if the FP/card can open the door in the controller.

4. Wring Diagram SAC844 M5 1 2 5 6 7 12V 12V NC GND GND Exit Button 12V
COM NC NO 1 2 5 6 7
12V
GND
SAC844
12V
GND M5
Exit Button
12V
GND

5. How to make FP/Card work
Pls refer to below video:

6. Thank you！