2. ♣ Flathead screwdriver ♣ Warm water ♣ Soap ♣ Towel ♣ Compressed air ♣ Items needed ♣ Denatured Alcohol ♣ Cotton wool ♣ Alcohol swabs (Optional)

3. first start by removing the keys this can done by placing a screw driver underneath the key and pushing it upwards

4. After removing all the keys it should look something like this

5. After the large pieces of dust are gone use the alcohol swab to wipe away the fine dust You can use a brush to help get into small places

6. Soak the cotton with denatured alcohol but make sure it is not too wet You can also use the alcohol swabs

7. After you have cleaned all the keys it is time to put them back onto the keyboard

8. After assembling all the keys your keyboard should look as good as new