1. Graphic Science (MEL110) (2-0-4) Dr. Ashish K Darpe,
Department of Mechanical Engineering
  III-176 #6095(O), #1618(R)
Course for Part 1:
Introduction, general instructions for lettering, instruments, etc.
Projection Systems- perspective, orthographic, isometric & oblique,
Dimensioning
Practicals for Part 1 – sketching on tracing sheets.
Tracing sheet pad, one graph paper, H&HB pencils, eraser,
zero grade sand paper.

2. Text Book:Fundamentals of Engineering Drawing
Luzadder & Duff
(9th or 11th Edition) Prentice-Hall of India
Additional Reference Book: Engineering Drawing, N D Bhatt
Some practicals on computer in
Computer Aided Graphics Instruction Laboratory (CAGIL)
Room No. III

3. COURSE OVERVIEW
Lettering
Projections
Orthographic Axonometric Isometric Oblique
Plane geometric constructions (Engg.Curves)
Projections on Auxiliary Planes
Projection of planes and solids 
Sectional Views  
Intersection of surfaces 
Development of surfaces 
Computer Aided Drawing

4. ORTHOGRAPHIC PROJECTIONS
ISOMETRIC PROJECTIONS

5. ENGINEERING CURVES

6. AUXILIARY VIEWS

7. INTERPENETRATION OF SURFACES

8. DEVELOPMENT OF SURFACES

9. SECTION OF SOLIDS

10. ORTHOGRAPHIC PROJECTION
Frontal Plane (Vertical Plane) PP
PATTERN OF PLANES & VIEWS (First Angle Method) FP Y
A) HP IS ROTATED 900 DOUNWARD
B) PP, 900 IN RIGHT SIDE DIRECTION.
THIS WAY BOTH PLANES ARE BROUGHT IN THE SAME PLANE CONTAINING FP. X
Horizontal Plane (Top Plane) HP FP HP PP X Y FV
LSV X Y TV
ACTUAL PATTERN OF PLANES & VIEWS
OF ORTHOGRAPHIC PROJECTIONS
DRAWN IN
FIRST ANGLE METHOD OF PROJECTIONS
HP IS ROTATED DOWNWARD 900
AND
BROUGHT IN THE PLANE OF FP.
PP IS ROTATED IN RIGHT SIDE 900
AND
BROUGHT IN THE PLANE OF FP.

11. THIRD ANGLE PROJECTION P.P. F.P. OBJECT F.V. X Y S.V. FOR T.V.
IN THIS METHOD,
THE OBJECT IS ASSUMED TO BE
SITUATED IN THIRD QUADRANT
( BELOW HP & BEHIND OF FP. )
PLANES BEING TRANSPERENT
AND INBETWEEN
OBSERVER & OBJECT.
P.P.
F.P.
OBJECT TV X Y
S.V.
F.V.
LSV FV
ACTUAL PATTERN OF
PLANES & VIEWS OF
THIRD ANGLE PROJECTIONS
FOR S.V.
FOR F.V.