1. 1 Teaching Innovation - Entrepreneurial - Global The Centre for Technology enabled Teaching & Learning, N Y S S, India DTEL DTEL (Department for Technology Enhanced Learning)

2. DEPARTMENT OF MECHANICAL ENGINEERING VIII-SEMESTER AUTOMATION IN PRODUCTION 2 CHAPTER NO.4 AUTOMATED MATERIAL HANDLING AND STORAGE CONVEYOR SYSTEM

3. CHAPTER 1:- SYLLABUSDTEL. Digital signal, Digital systems 1 Logic families- Characteristics, Classification 2 Number System- Classification 3 Basic gates 4 3 Boolean laws- De Morgan’s theorems 5

4. CHAPTER-1 SPECIFIC OBJECTIVE / COURSE OUTCOMEDTEL Understand the Digital Systems and Logic Families. 1 Conversion of different number systems.. 2 4 The student will be able to:

5. LECTURE 1:- AMH &SCSDTEL Material Handling Defined 5 5 “The movement, storage, protection and control of materials throughout the manufacturing and distribution process including their consumption and disposal” Estimated to represent 20-25% of total manufacturing labor cost in US  The proportion varies depending on type of production and degree of automation Handling of materials must be performed  Safely  Efficiently  At low cost  In a timely manner  Accurately (the right materials in the right quantities to the right locations)  And without damage to the materials

6. LECTURE 1:- AMH &SCSDTEL Logistics 6 6 Concerned with the acquisition, movement, storage, and distribution of materials and products as well as the planning and control of these operations to satisfy customer demand Two categories of logistics:  External logistics - transportation and related activities that occur outside of a facility (between different geographical locations) Five traditional modes of transportation: rail truck, air, ship, and pipeline  Internal logistics - material handling and storage within a facility

7. LECTURE 1:- AMH &SCSDTEL Conveyor Systems 7 7 Large family of material transport equipment designed to move materials over fixed paths, usually in large quantities or volumes 1.Non ‑ powered Materials moved by human workers or by gravity 2.Powered Power mechanism for transporting materials is contained in the fixed path, using chains, belts, rollers or other mechanical devices Conveyor Types  Roller  Skate ‑ wheel  Belt  In ‑ floor towline  Overhead trolley conveyor  Cart-on-track conveyor

8. LECTURE 1:- AMH &SCSDTEL Roller Conveyor 8 8 Pathway consists of a series of rollers that are perpendicular to direction of travel Loads must possess a flat bottom to span several rollers Powered rollers rotate to drive the loads forward Powered roller conveyors are driven by belts or chains Un-powered roller conveyors also available

9. LECTURE 1:- AMH &SCSDTEL Skate-Wheel Conveyor 9 9 Similar in operation to roller conveyor but use skate wheels instead of rollers Lighter weight and unpowered Sometimes built as portable units that can be used for loading and unloading truck trailers in shipping and receiving

10. LECTURE 1:- AMH &SCSDTEL Belt Conveyor 10 Continuous loop with forward path to move loads Belt is made of reinforced elastomer Support slider or rollers used to support forward loop Two common forms:  Flat belt (shown)  V-shaped for bulk materials

11. LECTURE 1:- AMH &SCSDTEL Chain Conveyor 11 Chain-A conveyor on which material is transported along solid pans by the scraping action of crossbars that are connected by chains.  Chain conveyors use belts or rollers to move objects  Speeds of up to 60 fpm, but depend on size of object, for safety reasons  Relay logic and pneumatic control devices used to control and program the chain

12. LECTURE 1:- AMH &SCSDTEL Overhead Trolley Conveyor 12 A trolley is a wheeled carriage running on an overhead track from which loads can be suspended Trolleys are connected and moved by a chain or cable that forms a complete loop Often used to move parts and assemblies between major production areas

13. LECTURE 1:- AMH &SCSDTEL In-Floor Tow-Line Conveyor 13 Four-wheel carts powered by moving chains or cables in trenches in the floor Carts use steel pins (or grippers) to project below floor level and engage the chain (or pulley) for towing This allows the carts to be disengaged from towline for loading and unloading

14. LECTURE 1:- AMH &SCSDTEL Cart-On-Track Conveyor 14 Carts ride on a track above floor level Carts are driven by a spinning tube Forward motion of cart is controlled by a drive wheel whose angle can be changed from zero (idle) to 45 degrees (forward)

15. LECTURE 1:- AMH &SCSDTEL What is AGV? 15 AGV is a material handling system that uses independently operated, self- propelled vehicles guided along defined pathways. AGVs increase efficiency and reduce costs by helping toa utomate a manufacturing facility or warehouse. AGVs can carry loads or tow objects behind them in trailers. The trailers can be used to move raw materials or finished product.

16. LECTURE 1:- AMH &SCSDTEL Types of AGV’S 16 Driverless trains AGV’s pallet trucks Unit load carriers

17. LECTURE 1:- AMH &SCSDTEL Driverless trains 17 It consists of a towing vehicle that pulls one or more trailers to form a train. This type is applicable in moving heavy pay loads over large distance in warehouses or factories with or without intermediate pickup and drop off points along the route. It consists of 5-10 trailers and is an efficient transport system. The towing capacity is up to 60,000 pounds Common application is moving heavy payloads over long distances in warehouses and factories without intermediate stops along the route

18. LECTURE 1:- AMH &SCSDTEL AGV Pallet Trucks 18 Pallet trucks are used to move palletized loads along predetermined routes. The capacity of an AGV pallet truck ranges up to several thousand kilograms and some are capable of handling two pallets. It is achieved for vertical movement to reach loads on racks and shelves. Used to move palletized loads along predetermined routes Vehicle is backed into loaded pallet by worker; pallet is then elevated from floor Worker drives pallet truck to AGV guide path and programs destination

19. LECTURE 1:- AMH &SCSDTEL Unit load carriers 19 These are used to move unit loads from one station to another. It is also used for automatic loading and unloading of pallets by means of rollers. Load capacity ranges up to 250 kg or less. Especially these vehicles are designed to move small loads. Used to move unit loads from station to station Often equipped for automatic loading/unloading of pallets and tote pans using roller conveyors, moving belts, or mechanized lift platforms

20. LECTURE 1:- AMH &SCSDTEL Vehicle Guidance Technology 20 Method by which AGVS pathways are defined and vehicles are controlled to follow the pathways Three main technologies:  Imbedded guide wires - guide wires in the floor emit electromagnetic signal that the vehicles follow  Paint strips - optical sensors on-board vehicles track the white paint strips  Self-guided vehicles - vehicles use a combination of Dead reckoning - vehicle counts wheel turns in given direction to move without guidance Beacons located throughout facility - vehicle uses triangulation to compute locations

21. LECTURE 1:- AMH &SCSDTEL Vehicle Guidance Using Guide Wire 21

22. LECTURE 1:- AMH &SCSDTEL Vehicle Management 22 Two aspects of vehicle management: Traffic control - to minimize interference between vehicles and prevent collisions 1.Forward (on-board vehicle) sensing 2.Zone control Vehicle dispatching 1.On-board control panel 2.Remote call stations 3.Central computer control

23. LECTURE 1:- AMH &SCSDTEL Zone Control 23 Zone control to implement blocking system. Zones A, B, and D are blocked. Zone C is free. Vehicle 2 is blocked from entering Zone A by vehicle 1. Vehicle 3 is free to enter Zone C.

24. LECTURE 1:- AMH &SCSDTEL Vehicle Safety 24 Travel velocity of AGV is slower than typical walking speed of human worker Automatic stopping of vehicle if it strays from guide path  Acquisition distance Obstacle detection system in forward direction  Use of ultrasonic sensors common Emergency bumper - brakes vehicle when contact is made with forward object Warning lights (blinking or rotating red lights) Warning sounds of approaching vehicles

25. LECTURE 1:- AMH &SCSDTEL Rail-Guided Vehicles 25 Self-propelled vehicles that ride on a fixed-rail system Vehicles operate independently and are driven by electric motors that pick up power from an electrified rail Fixed rail system  Overhead monorail - suspended overhead from the ceiling  On-floor - parallel fixed rails, tracks generally protrude up from the floor Routing variations are possible: switches, turntables, and other special track sections

26. LECTURE 1:- AMH &SCSDTEL Overhead Monorail 26

27. LECTURE 1:- AMH &SCSDTEL Flow Rate, Routing, and Scheduling 27 Flow rate - amount of material moved per unit time  Examples: pieces/hr, pallet loads/hr, tons/hr  Whether the material must be moved in individual units, as batches, or continuously (pipe line) Routing - pick-up and drop-off locations, move distances, routing variations, conditions along the route (surface, traffic, elevation) Scheduling - timing of each delivery  Prompt delivery when required  Use of buffer stocks to mitigate against late deliveries

28. LECTURE 1:- AMH &SCSDTEL AGVs Applications 28 1.Driverless train operations - movement of large quantities of material over long distances 2.Storage and distribution - movement of pallet loads between shipping/receiving docks and storage racks 3.Assembly line operations - movement of car bodies and major subassemblies (motors) through the assembly stations 4.Flexible manufacturing systems - movement of workparts between machine tools 5.Miscellaneous - mail delivery and hospital supplies

29. LECTURE 1:- AMH &SCSDTEL Analysis of AGVS Systems 29 Analysis of vehicle-based systems  From-to charts and network diagrams  Types of systems: industrial trucks, AGVS, rail-guided vehicles, and asynchronous conveyor operations Conveyor analysis  Single-direction conveyors  Closed loop conveyors  Recirculating conveyor systems

30. LECTURE 1:- AMH &SCSDTEL Network Diagram Showing Deliveries between Load/Unload Stations 30

31. LECTURE 1:- AMH &SCSDTEL Storage Systems Function – to store materials (e.g., parts, work-in-process, finished goods) for a period of time and permit retrieval when required Used in factories, warehouses, distribution centers, wholesale dealerships, and retail stores Important supply chain component Automation available to improve efficiency 31

32. LECTURE 1:- AMH &SCSDTEL Storage System Performance 32 Performance measures for storage systems: Storage capacity - two measures:  Total volumetric space  Total number of storage compartments (e.g., unit loads) Storage density - volumetric space available for storage relative to total volumetric space in facility Accessibility - capability to access any item in storage System throughput - hourly rate of storage/retrieval transactions Utilization and availability (reliability)

33. LECTURE 1:- AMH &SCSDTEL Types of Automated Storage System 33 1.Automated Storage/Retrieval System (AS/RS) Rack system with mechanized or automated crane to store/retrieve loads 2.Carousel Storage System Oval conveyor system with bins to contain individual items

34. LECTURE 1:- AMH &SCSDTEL AS/RS 34 Unit load on pallet AS/RS with one aisle

35. LECTURE 1:- AMH &SCSDTEL AS/RS Types 35 Unit load AS/RS - large automated system for pallet loads Deep-lane AS/RS - uses flow-through racks and fewer access aisles Miniload AS/RS - handles small loads contained in bins or drawers to perform order picking Man-on-board AS/RS - human operator rides on the carriage to pick individual items from storage Automated item retrieval system - picks individual items Vertical lift storage modules (VLSM) - uses a vertical aisle rather than a horizontal aisle as in other AS/RS types

36. LECTURE 1:- AMH &SCSDTEL AS/RS Applications 36 1.Unit load storage and retrieval  Warehousing and distribution operations  AS/RS types: unit load, deep lane (food industry) 2.Order picking AS/RS types: miniload, man-on-board, item retrieval 3.Work-in-process storage  Helps to manage WIP in factory operations  Buffer storage between operations with different production rates  Supports JIT manufacturing strategy  Kitting of parts for assembly

37. LECTURE 1:- AMH &SCSDTEL Carousel Storage Systems 37 Horizontal  Operation is similar to overhead conveyor system used in dry cleaning establishments  Items are stored in bins suspended from the conveyor  Lengths range between 3 m and 30 m  Horizontal is most common type Vertical  Operates around a vertical conveyor loop  Less floor space required, but overhead room must be provided

38. LECTURE 1:- AMH &SCSDTEL Horizontal Carousel Storage System 38 Manually operated horizontal carousel storage system

39. LECTURE 1:- AMH &SCSDTEL Carousel Applications 39 1.Storage and retrieval operations  Order picking  Kitting of parts for assembly 2.Transport and accumulation  Progressive assembly with assembly stations located around carousel 3.Work-in-process  WIP applications in electronics industry are common 4.Unique applications  Example: time testing of electrical products

40. LECTURE 1:- AMH &SCSDTEL Engineering Analysis of Automated Storage Systems 40 1.Automated Storage/Retrieval Systems  Sizing the AS/RS  AS/RS throughput analysis 2.Carousel storage systems  Storage capacity  Throughput analysis

41. DTEL 41 THANK YOU LECTURE 3:- NUMBER SYSTEM

42. DTEL References Books: 42 References Web: