1. Quadcopter Setup

2. 1. Fully charge batteries on Quadcopter, Remote Control and WiFi extender.

3. Quadcopter Setup 2. Make sure propellers are tightened with a wrench.

4. Quadcopter Setup 3. Power up units in this order: 1. Remote Control 2. WiFi extender 3. Quadcopter 2 13

5. Quadcopter Setup 4. After powering up, wait until LEDs flash 10 times quickly for GPS setup.

6. Quadcopter Setup 5. Calibrate Compass before every flight at new location. Make sure you are not around any: -Power lines, Cell phones, large metal objects

7. Quadcopter Setup 6. Flick upper right switch up and down 5 times to enter compass calibration. (compass calibrate)

8. Quadcopter Setup 7. Rotate Quadcopter 360 degrees horiz. and 360 degrees vertical (front down) (compass calibrate)

9. Quadcopter Setup 8. Set Quadcopter on flat surface with red stripes (front) away from you. FRONT

10. Quadcopter Setup 9. Move both stick to the bottom and inward to start propeller motors.

11. Quadcopter Setup 10. Take off!

12. Quadcopter Setup 11. After landing, hold left stick down for 2 seconds to turn motors off.

13. Quadcopter Setup 12. After landing, power down units in this order: 1. Quadcopter 2. WiFi extender 3. Remote Control 2 31