1. Federated MDBs with Multiple SQL Instances Last Revision Date: September 6, 2006

2. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. Glossary - The following terms and abbreviations are used in this presentation: - “HA” = Highly Available - “UAPM” – Unicenter Asset Management Portfolio - “USD” = Unicenter Service Desk - “DSM” – Unicenter Desktop Server Management - “eIAM” = CA eTrust Embedded Identity and Access Management - “MSCS” = Microsoft Cluster Server - “NSM” = Unicenter Network System Management

3. Overview

4. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. Objectives - The objective of this document is not to discuss MDB Federation or what products should share MDB. For a detailed discussion of MDB federation and deployment choices consult the MDB Federation presentation insteadMDB Federation - The main objective of this presentation is to review the implications of installing multiple SQL MDBs on a single server having multiple SQL instances. Additional information is provided regarding the install of multiple SQL MDBs in a Microsoft cluster environment - These discussions assume that you have already reviewed the MDB Federation presentation and wish to pursue federation on the same server or same cluster

5. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. Why use multiple SQL instances? - Reduce cost of ownership - If correctly planned, the normal mode of operation in a Microsoft Cluster environment can include active SQL instances on different nodes of the cluster. This provides federation without overloading single cluster node. - In the event of a failover both SQL instances can potentially be active on the same node. - This would not be classified as “normal” mode of operation

6. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. Default SQL Instance - Some products do not support named SQL instances. DSM is one of these, but it is targeted to support named instances soon. - Although DSM will install correctly using named SQL instances, there are some issues with named SQL instances - Therefore, if DSM is being installed in an environment using multiple SQL instances, one of the SQL instances should be the default instance.

7. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. Multiple MDBs – one Product - Installing multiple MDBs for the same product on the same server can cause the product to malfunction and, in some cases, the install process will prevent it from being installed. - NSM install process prevents multiple MDBs from being created on different SQL instances running on the same server. - Several NSM components caches repository (MDB) details. If MDB location is changed password and MDB details must be updated for all of these components

8. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. NSM and Multiple MDBs - NSM MDB has been locked down with named SQL instance (SQLINSTA) - Install processes attempts to create another NSM MDB on a default instance - Install process for subsequent NSM MDBs will prevent override of the database server or SQL instance details

9. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. NSM and Multiple MDBs This shows multiple NSM MDBs cannot be created on the same server

10. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. SQL Instances This shows default and named SQL instances – each with an MDB

11. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. Multiple SQL Instances This shows cluster setup with default and named SQL instances each having an MDB spread across different products

12. Install Summary for Cluster and Non-cluster Configurations

13. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. Single Server - Multiple MDB Instances SQL Named Instance SQLINSTA NSM SQL Default Instance DSM USD NSM Worldview Enterprise Mgt WV Provider eIAM – Ingres Instance Multiple MDB instances This shows non-cluster setup with multiple SQL MDBs

14. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. Single Server: USD – Default Instance - Here USD MDB is installed on a default SQL instance while NSM MDB exists on the named SQL instance - In addition, eIAM is selected (this will install Ingres ET instance, as well)

15. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. Single Server: NSM – Named Instance - Here NSM MDB is created on named SQL instance while USD MDB already exists in the default SQL instance

16. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. Single Server: SQL Instances This shows two MDBs on different SQL instances installed on the same server

17. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. Single Server: SQL Instances Services

18. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. Cluster Setup - This shows two SQL instances - default and named. Each instance will have MDB based on the MDB deployment choices discussed in the Federation presentation

19. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. Cluster Setup: DSM MDB Install - This shows DSM MDB installed on the default SQL Instance which it shares with USD and UAPM. NSM MDB will be installed on a named instance

20. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. Cluster Server: SQL Setup - This shows two SQL instances, each with an MDB in a Microsoft Cluster setup

21. Gotchas

22. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. Considerations - There should not be any special considerations for installing multiple MDBs on the same server using different SQL instances or for installing in a Microsoft Cluster environment using multiple SQL instances. - The considerations listed in this section are not specific to multiple MDBs on the same cluster or server

23. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. USD and DSM Install order - If USD and DSM will share an MDB, install DSM first. Otherwise, you may experience 1603 error (The setup here was USD 11.2 and DSM 11.1a without C1 fix)

24. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. DSM Install MDB - DSM may identify existence of previous MDB and generate a dialog box which may be irrelevant for SQL MDB

25. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. System Path - Unicenter NSM install validates the system path length, computing the length of system path entry based on NSM products selected. If the computed length exceeds 1024 bytes the install will not continue - If multiple products are installed, it is likely the system path length will be exceeded

26. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. System Path Prior to Install This shows system path prior to installing any NSM components. The path entries listed above include pre-installed DSM Agent + Software delivery plug-in, eTrust Antivirus option, and USD eIAM option

27. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. Path Length Exceeded

28. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. Circumvention - To circumvent this potential problem, change the location of CA Common Services from “\Program Files\CA\SharedComponents” to “\CA\SharedComponents” - Alternatively, shorten path length by changing existing entries to short name (8dot3 format). For example: - C:\Program Files\CA\eTrust Directory\dxserver\bin to - C:\Progra~1\CA\eTrust~2\dxserver\bin - User dir /X to option convert to 8dot3 format - Remove duplicate entries

29. Copyright ©2006 CA. All rights reserved. All trademarks, trade names, services marks and logos referenced herein belong to their respective companies. Directory Name Shortened Changed CA Common Services location from \Program Files\CA\SharedComponents to \CA\SharedComponents