1. Vicon subsoiler - Terra PL Product Information 2013

2. Terra PL

3. Range : –4 to 8 tines bolted onto the fram –working width 3 and 4 m. Single beam box section 200 x 200 x 10 mm –Linkage cat II & III –High Beam clearance of 1175 mm for good material flow –Working depth down to 40 cm Frame concept

4. For loosening from 15 down to 40cm Curved tine with wearing plate and reversible share. Power requirement: 25hp/tine Loosening by lifting up and cracking the soil No sole will be created No gap of air Soil is not mixed up, respect of the structure Top layer stays flat and even, to allow easy further ground preparation and power harrow operation Stones are not lifted up Tines

5. Shear bolted leg (120 kg bolt) tine mounted on a special rocking plate so that the complete tine and tine holder is pivoting towards the front without touching the rear equipment Safe in working position and compact by transport Safety system

6. Cat II linkage to couple a drill combination Linkage moving back for compact transport and safety in working position Those arms will be replace by other holding parts when using a roller or gauge wheels Rear linkage for combination

7. Wheels 235/75 x 15 Adjustment by pin 2 assembly possibilities : Outside the width Inside on the rear linkage arms Gauge wheels

8. Cage roller Ø 550 mm : 10 bars Self aligning and greasable bearings Good crumbling and levelling in dryer conditions Good depth control Cage roller

9. Packer roller 500 mm Ø 500 mm Self aligning and greasable bearings Fitting arms to sub frame Individual scraper adjustment Good firming Individual crest for better cleaning Packer roller

10. Terra PL - technical datas