1. PREZENTACJA WSPÓŁFINANSOWANA PRZEZ UNIĘ EUROPEJSKĄ ZE ŚRODKÓW EUROPEJSKIEGO FUNDUSZ SPOŁECZNEGO W RAMACH PROJEKTU MBM – KIERUNEK ZAMAWIANY

2. MICHAL SKAKUJ 7/28/2015Michal Skakuj PH/DT Internship final presentation June-July 2015

3. 7/28/2015Michal Skakuj PH/DT During my internship I participated in the 3D design of the test stand for the validation of the 3M NOVEC 649 as future replacement of the C 6 F 14 refrigerant in the ATLAS cooling system. Main tasks: - Measurement of an existing frame and creation of the 3D model in Catia - Design of the 3D model pipeline - 3D modelling of mechanical components - Assembly of the components and the pipeline into the rack - Prepare 2D construction drawings

4. 7/28/2015Michal Skakuj PH/DT Measurement of an existing frame and prepare the 3D model in Catia.

5. 7/28/2015Michal Skakuj PH/DT Next step was introduction to the Process and Instrumentation Diagrams (P&ID) test bench. During my internship we had various version, below is the latest which is being base for 3D model.

6. 7/28/2015Michal Skakuj PH/DT Design of 3D pipeline In the beginning pipeline and components was created as a simple shapes to see how much free space we have. In the course of time the model was improving.

7. 7/28/2015Michal Skakuj PH/DT Part list:

8. 7/28/2015Michal Skakuj PH/DT Based on part list I replaced the simple shapes by 3D models. Some of them was obtained from companies support and some was modeled by me. MECA-INOX PS4 TYPE 3-PIECE BALL VALVE

9. 7/28/2015Michal Skakuj PH/DT Components modeled by me Pressure transmitter DMP 331 Pressure regulating valve with gauge

10. 7/28/2015Michal Skakuj PH/DT Connection list Connection between components and pipeline was very important and time-consuming task. Finally thanks to collaboration with Dina Giakoumi and Piotr Dziurdzia we have created the connection list.

11. 7/28/2015Michal Skakuj PH/DT Examples of connections : Swagelok union tee Swagelok tube fitting Welded connection Straight socket GAZ- NTP thread Tube fitting adapter Flange connection

12. 7/28/2015Michal Skakuj PH/DT Final assembly

13. 7/28/2015Michal Skakuj PH/DT Final assembly Manifold ⌀ 6mm, ⌀ 8mm, ⌀ 10mm

14. 7/28/2015Michal Skakuj PH/DT 2D connection drawing One of the last tasks was creating 2D construction drawings with details to the connections. The 2D assembly drawings that will explain step by step the assembly procedure.

15. 7/28/2015Michal Skakuj PH/DT Still to do : Add support for pipeline and tank. Select few missing components and create connection between them and pipeline.

16. 7/28/2015Michal Skakuj PH/DT THANK YOU FOR YOUR ATTENTION !