1. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 1 FIGURE 5–1 A typical shop compressor. It is usually placed out of the way, yet accessible to provide for maintenance to the unit.

2. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 2 FIGURE 5–2 Always use an air nozzle that is OSHA approved. The openings in the side are used to allow air to escape if the nozzle tip were to become clogged.

3. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 3 FIGURE 5–3 A typical 1/2 in. drive impact wrench.

4. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 4 FIGURE 5–4 This impact wrench features a variable torque setting using a rotary knob. The direction of rotation can be changed by pressing the button at the bottom.

5. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 5 FIGURE 5–5 A typical battery-powered 3/8 in. drive impact wrench.

6. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 6 FIGURE 5–6 A black impact socket. Always use impact-type sockets whenever using an impact wrench to avoid the possibility of shattering the socket, which can cause personal injury.

7. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 7 FIGURE 5–7 An air ratchet is a very useful tool that allows fast removal and installation of fasteners, especially in areas that are difficult to reach or do not have room enough to move a hand ratchet wrench.

8. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 8 FIGURE 5–8 This typical die grinder surface preparation kit includes the air-operated die grinder, as well as a variety of sanding discs for smoothing surfaces or removing rust.

9. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 9 FIGURE 5–9 A fluorescent trouble light operates cooler and is safer to use in the shop because it is protected against accidental breakage where gasoline or other flammable liquids would happen to come in contact with the light.

10. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 10 FIGURE 5–10 A typical pedestal grinder with a wire wheel on the left side and a stone wheel on the right side. Even though this machine is equipped with guards, safety glasses or a face shield should always be worn when using a grinder or wire wheel.

11. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 11 FIGURE 5–11 A typical vise mounted to a workbench.

12. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 12 FIGURE 5–12 A hydraulic press is usually used to press bearings on and off on rear axles and transmissions.

13. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 13 FIGURE 5–13 A typical portable crane used to lift and move heavy assemblies, such as engines and transmissions.

14. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 14 FIGURE 5–14 Two engines on engine stands. The plastic bags over the engines help keep dirt from getting onto these engines and engine parts.

15. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 15 FIGURE 5–15 An engine stand that grasps the engine from the sides rather than the end.

16. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 16 SETUP AND LIGHTING A TORCH

17. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 17 SETUP AND LIGHTING A TORCH

18. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 18 SETUP AND LIGHTING A TORCH

19. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 19 SETUP AND LIGHTING A TORCH

20. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 20 SETUP AND LIGHTING A TORCH

21. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 21 SETUP AND LIGHTING A TORCH

22. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 22 HEATING METAL

23. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 23 HEATING METAL

24. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 24 HEATING METAL

25. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 25 CUTTING METAL

26. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 26 CUTTING METAL

27. Automotive Engines: Theory and Servicing, 7/e By James D. Halderman Copyright © 2011, 2009, 2005, 2001, 1997 Pearson Education, Inc., Upper Saddle River, NJ 07458 All rights reserved. 27 CUTTING METAL