Download presentation
Presentation is loading. Please wait.
Published bySabrina Daniel Modified over 8 years ago
1
BRAKE UNIT Mr. Masters Tech Ed 12th
2
Caliper brake design Most cars from the 1990 and up are equipped with caliper brakes
3
Why are brakes important
5
Work sheet Fill out worksheet as we go through power point. This is your participation points for the day. Work sheet must be completed by the end of the class period. May work with table partner to complete work sheet. Objective for the day To have an understanding of brake components.
7
Hub Assembly Mounts tire to car Holds rotor and caliper
8
ROTOR Surface in which the brake pads are applied Steel material Slotted/ Vented High performance
9
Guides Attached on brake caliper Sets in place brake pads
10
Brake pads M spring Brake pads metal backer Material used on brake pads Semi metallic Organic Asbestos M spring holds brake pads together against rotor
13
NEW BRAKES WORN BRAKES
14
Assess the brake pads in front of you What do you see What condition are then in Would you put them in your car
16
Caliper Sliding pin Caliper mounts to bracket attached to wheel hub brake pads go on inside of caliper. Sliding pins allow caliper to close and open
18
Copper washer banjo bolt break line Copper washer go in-between brake line Held in place by banjo bolt Brake line supplies brake fluid to caliper
19
Drum brakes NEXT WEEK
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.