1. Click the knife

3. Tip Cutting Edge Bolster Heel RivetsHandle Butt Spine Go To Test

4. The tip of the knife is at the opposite end of the handle and is pointed, sharp and fairly thin. It is typically pointed but there are some knives with ends that are cut off straight, rounded or at a slant. The tip is used for cutting small items, cutting food into thin strips, and carving. It is also used for making incisions, such as would be used when making a slit in the side of pork chops or chicken breasts where stuffing would be added. Next

5. The cutting edge is the bottom edge of the blade that runs from the heel to the tip of the blade. It is very sharp and can be straight cut or serrated. The cutting edge is used to slice, cut or chop food items both large and small, with the middle of the blade being used most often. The blade edges are available with different grinds, which have different purposes. Next

6. Hollow Ground Knife blades with a concave bevelled edge are created by starting midway or lower from the top of the blade and grinding or tapering each side of the blade thinner toward the bottom or cutting edge by grinding an inward curvature. As the blade is ground the slight curve (concave) grind creates the "hollow" area referenced in the name of the blade edge. Produced with either a fluted pattern or a bevelled pattern, a hollow grind provides a very thin and exceptionally sharp edge that can be easily sharpened when necessary. It is a type of blade that is excellent for slicing due to the sharp edge, but not for chopping activities since the higher impact of the chopping action dulls or may chip the thinner blade. Next

7. A term used to describe a knife blade that most often contains evenly spaced vertical indentations or "hollows" that have been ground out of the thickness of the steel blade. The hollow edge blade is also known as a Granton blade. A Santoku knife is an example of one type of utensil that is commonly produced with a hollow edge or Granton edge by many knife manufacturers. The purpose of the hollow edge or Granton-style blade is to assist with keeping particles from sticking to the knife edge as it chops small bits of food. It is also a friction reducer to provide less drag when chopping, which enables easier and faster motion. Next

8. The opposite of a hollow-ground blade, this type of knife blade rounds outward instead of inward such as a hollow grind. Commonly used for larger blades such as cleavers and axes, the Convex Grind provides a rounded cutting surface on the bottom cutting edge of the blade rather than a straight edge or a flat grind. It is similar to the flat ground "V" cut except rounded rather than straight or flat ground. Durable in structure, the Convex Ground Blade can be used for chopping and cutting activities required for thicker textured items such as meats, bones, and fibrous foods Next

9. The blade of a knife that decreases in size from the handle to the tip and from the spine to the cutting edge. The blade is manufactured from a single sheet of metal and has been ground on one side or two sides of the surface so that it tapers smoothly from the spine to the cutting edge without creating a bevel. Often referred to as a fully tapered blade when ground from top to bottom, the taper grind can also be produced as a partially tapered grind. Thicker at Spine edge Next

10. Tapers to a Thinner Cutting Edge The partially tapered grind starts midway down the blade and extends to the cutting edge, becoming more like a flat grind or flat ground blade. Unlike the hollow ground blade that has a either a bevelled or fluted edge, the taper ground blade is a more stable knife blade due to the rigid structure of a finely tapered, sheet of metal. Thus, the taper ground blade is made to withstand more cutting action as it cuts cleanly through a variety of foods and food textures when slicing or chopping. Next

11. The type of blade with a straight "V" cut ground into the steel edge. Varying in depth, the flat ground blade can be made with only a very slight "V" cut or a longer cut that tapers slightly from higher up on the blade and extends downward toward the cutting edge. Knives with a flat grind can be used for cutting as well as chopping activities since the blade is generally very stable. Next

12. This type of blade has a grind that is made on only one side of the blade, which creates an edge that looks like the blade of a chisel and thus the origin of its name. While one side of the blade remains flat surfaced, the other side of the chisel ground blade is cut at an angle. When the blade is viewed from the tip back, it looks like half of a "V" ground blade. Most often used for making blades of chisels, axes, and swords, this grind is also used on some knives but it is not as common as the flat grind or "V" grind. Next

13. Wooden Handles Hardwoods with tight grains are best for making wood handles. Rosewood, Brazilian Ironwood, and Ebony are woods that work well for making knife handles. Wood handles provide an excellent grip, but requires more maintenance than a plastic or stainless steel handle. It is thought that wood handled knives absorb microorganisms and are not as sanitary as knives with handles made of other materials. Next

14. Wood Handles Infused with Plastic A combination of the best attributes of wood handles and moulded plastic handles. They have an excellent grip but do not require the maintenance all wood handles require. They are also not as porous as wood handled knives, preventing the absorption of microorganisms. Next

15. Moulded Plastic or Composition Moulded plastic handles are much easier to care for than wooden handles. They will not absorb debris and microorganisms and are easily cleaned. It is argued that handles made with moulded plastics become brittle over time, causing them to break and that they can become slippery if hands are wet, making them harder to handle. Next

16. Stainless Steel Metal handled knives last longer and add weight to the knife. There are arguments made that stainless steel handles are slippery if hands become damp, making them harder to handle. As with the plastic handles, stainless steel will not absorb debris and microorganisms and are easily cleaned. Next

17. Traditional Chefs Knife Mini Chefs Knife Chestnut Knife Clam Knife Cleaver Deli Knife Devein Knife Filet Knife Next

18. Mini Chef's Knife Traditional Chef's Knife Also called a cook's knife, this knife is an all purpose kitchen knife that is used for most types of chopping, dicing, mincing, and slicing. Chef's knives come in various lengths of 6, 8, 10, and 12 inches. The smaller sized knives are typically referred to as mini chef's knives while the longer lengths are known as traditional chef's knives. The heft, weight and balance of this knife allow it to be used for heavy duty work with thicker cuts of vegetables, fruits and meats. Next

19. Chestnut Knife A kitchen utensil that is used to score the chestnut prior to roasting. By carving a line, a cross or an "X" into the shell of the unroasted nut, it allows it to breathe during roasting and to resist exploding as the steam builds up. The chestnut knife is short shafted in order to keep the cut confined to the shell without going too deeply to pierce the inner skin. After the chestnuts are done roasting, the knife can then be used to open the shell to remove the meat. To remove the nut, make a single score/cut fully around the middle of the shell. The nut may stick to the skin, but should be adequately separated to remove the nut easily. Next

20. Clam Knife A kitchen utensil that is used to pry open the hard shell of a clam or an oyster in order to remove the meat. Typically, the knife will have a beveled edged blade that can be inserted into the tightly closed shell, twisting the blade to pry the shell apart. The sharp edge of the knife is used to cut the clam muscles from the shell. Some knives will have a notch in the blade, which is used to keep the shell open to remove the meat. Next

21. Cleaver A knife with a wide rigid blade that is approximately 6 inches in length and tapers to a sharp cutting edge. This tool is used to chop, shred, pound, or crush food ingredients and materials. The blade of the cleaver is thick, somewhat heavy and well balanced with a beveled cutting edge. The beveled blade allows for ease of chopping through vegetables or hard materials, such as bones. The flat blunt side of the blade can be used to pulverize meat. If the handle is flat on the end it may be used to crush seeds, garlic or other similar ingredients. A hole is typically provided on the top end of the blade to allow for ease of hanging this tool when storing. Next

22. Deli Knife Designed for thick sandwiches, this knife is made to cut easily and quickly through a variety of sandwich ingredients. The deli knife is manufactured with a carbon steel, offset blade allowing for ease of slicing and handling. The offset blade keeps the hand holding the knife, up and away from cutting boards or counters as the blade is pushed downward through thicker than average sandwiches. The offset makes the knife handling easier to control and better positioned as the full length of the blade can be positioned so it is horizontally parallel with the cutting surface. Deli knives are available in several different lengths, the most common being 8 inches. Since the blade contains rounded serration, it easily releases resistance as it cuts through foods, resulting in less food being pulled out and away from the thicker, deli-style sandwiches. Next

23. Devein Knife A kitchen utensil that is used to remove the large vein that runs down the length of a shrimp. A fork can be inserted in the back of the shrimp to pull out the vein or a deveining knife can be used to cut a slit down the length of the shrimp. This tool is inserted at one end of the shrimp and then pushed up through the entire body to remove the vein and the shell at the same time. Next

24. Filet Knife A knife consisting of a thin flexible blade, typically 6 to 11 inches long, used for filleting fish. The narrow blade enables the knife to cleanly move along the backbones of the fish, in and around areas adjacent to bones, and to evenly slice along the skin, removing it easily from the flesh. Next

25. The spine is the edge opposite the cutting edge on the blade. It is thicker than the cutting edge and adds strength to the blade. It has a smooth, blunt edge to allow the user to grip it with thumb and forefinger or to be able to apply pressure with fingers or the palm of a hand to add control to the task being performed. Next

26. The heel is approximately the last two inches of the blade's cutting edge at the opposite end from the tip. It is used for cutting thick or coarse items that require extra pressure or strength. It assists in making faster more efficient cuts when the task calls for it. Next

27. A bolster is a thick piece of metal (collar or shank) that is at the end of the blade, just before the handle. It generally runs the full length from the spine of the blade down to the cutting edge. The bolster, along with the tang, gives the knife balance, which provides for better control of the knife when cutting. It also provides a place for fingers to be placed for comfort and also provides protection from the blade. The bolster is an indication that the blade was formed using the forged process rather than being stamped. Next

28. The butt end of the knife is at the opposite end of the tip. If the knife has a full tang it is where the tang ends. Sometimes the butt of the knife is used to tenderize or grind ingredients so it is important that the butt is of stable construction. Next

29. CLICK TO START THE TEST

30. A Hollow Edge ? B Hollow Ground ?

31. Try Again

32. Next Question