1. Curtain Controller SB-DN-2Motor

2. SB-DN-2Motot is a professional two curtains(shutters) controller. The curtain module can control the curtain by AC motor. Each curtain can set running time for closing the AC power if the curtain limit switch is failed. Each channel has inching function, it allows clients to control the motor to move in short time, such as changing the angle of shutter. HDL Bus can control the curtain from iPad/iPhone local and internet. Description

3. FWD1: toggle button - forward/stop. REV1: toggle button – backward/stop. FWD2: toggle button - forward/stop. REV2 : toggle button – backward/stop

4. Software Configuration Subnet ID and device ID modify the ID if needed Remark

5. Set the running time Set switch on delay time Set switch off delay time Software Configuration

6. Panel Setting Used a button to control curtain 1. Curtain’s IDCurtain No.

7. Single on, Curtain switch, 3, ON --->> curtain 1, louvre swing up; Single on, Curtain switch, 3, OFF --->> curtain 1, louvre swing down; Single on, Curtain switch, 4, ON --->> curtain 2, louvre swing up; Single on, Curtain switch, 4, OFF --->> curtain 2, louvre swing down; Louvre Swing UP/Down

8. 2-wire DC curtain motor

9. New curtain motor 1 HDL-MWM70B.12 HDL-MWM70S.12

10. HDL-MWM70B.12, HDL-MWM70S.12 the motorized curtain contains master and slave. It is a professional curtains controller, the master is enabled by HDL buspro. Support manual mode, it has the function of over load protection and over heat protection. Test the distance of the curtain automatically. Manual mode: long drag, short drag, drag no action. Percentage control. Control by HDL buspro. Support HDL buspro online upgrading. Support easy programming. Built-in new generation clutch, precise planetary reduce, noise level 40dB. It is suitable for all small to medium-scale curtain applications, linear and arched, one- and two-side opening. New curtain motor 1

11. New curtain motor 2 HDL-MVSM45B.12 is the tubular motor. It can control the roller shutter by HDL Buspro. It has overheat protection. Tubular motor can control to open, close, stop and percentage. Communication: HDL Buspro. AC motor is power source, provide enough power, it can make the torque of tubular motor big enough. Overheat protection. Supports online upgrading.

12. Tubular motor can control to open, close, stop and percentage. Communication: HDL Buspro. AC motor is power source, provide enough power, it can make the torque of tubular motor big enough. Overheat protection. Supports online upgrading.