1. Stage PINE TREE PISTOL CLUB Course Designer: START POSITION:
GUN READY CONDITION:.
SCORING: Comstock, 00 rounds, 000 points
TARGETS: 0 IPSC, 0 PP, 0 USP, 0 Plates
SCORED HITS: Best 2 per paper, KD steel = 1A
START-STOP: Audible - Last shot
RULES: USPSA current edition
STAGE PROCEDURE: Upon start signal, engage targets as required to score.

2. Flop-Up Flop-Up Flop-Up Flop-Up Plate Flop-Up Plate Flop-Up USP2 PP2
Drop Out Penalty
Drop Out Penalty
Out & Back NS
Out & Back Target
Drop Out Shoot
Drop Out Shoot
Flop-Up
Flop-Up
Can-Can Array
Flop-Up
Flop-Up
PP1
PP2
USP2
USP1
T10
Plate Flop-Up
Plate Flop-Up

3. Free Fire Zone

4. Ungroup a wall section, select some boards and remove them to create a port, then group the object again.

5. PORT COVER, copy and paste to cover or change size of see-thru ports
Walls with see-thru ports
PORT COVER, copy and paste to cover or change size of see-thru ports
Ungroup this wall, then click above, below, left or right of the port and resize the opening, then group the object again.

6. Walls with see-thru doorways & removable doors
Copy and paste, resize or edit points of this panel to cover or change a see thru doorway.
Doors- copy and paste these to make a door wall.

10. Rulers for taking measurements and scaling drawings
Rulers for taking measurements and scaling drawings. Red marks indicate the minimum distance for steel targets. To size a drawing to a different grid scale, group the drawings ruler with the drawing. Next copy and paste the ruler for the grid scale you want to resize to next to the drawings ruler. Now resize the drawing until its ruler matches the length of the 2nd ruler. (press & hold Shift & Alt during resizing).
32 Yard Grid Ruler: Scale = Feet
20 Yard Grid Ruler: Scale = Feet
15 Yard Grid Ruler: Scale = Feet

11. READ THIS BEFORE DELETING THIS TEXT BOX
Background Drawing Grid: 15 Yards x 21 Yards
READ THIS BEFORE DELETING THIS TEXT BOX
GRID BACKGROUND INSTRUCTIONS
The grid lines on this page are a background object. You cannot select, resize or move them.
WARNING: If you reformat this background, and save this template, you will loose the background grid permanently.
To remove the background for printing or viewing, use the Format Menu to Format the Background as White. To preserve the original template, save your work to a new filename by selecting File, Save as from the file menu.
Another method is to copy this slide and add it to the template as a new slide. If you use this method, you will protect yourself from inadvertently deleting the grid permanently. After copying the slide, do your work on the copy instead of the original. Remove any text boxes and the ruler as you need.
HELPFUL HINTS
DO NOT RESIZE THE RULER
Use this grid to do overhead view setup drawings. This will yield a properly scaled drawing you may use to eliminate shoot through targets, etc, and use as a measured drawing for match setup. To maintain the proper scale, size all your objects by using the ruler as a guide.
Placing 2 Stages on 1 Range
After completing your drawing, place the ruler at the bottom of the drawing and Group it with your drawing. Now you can copy and paste multiple drawings onto one slide. Next, resize your drawings relative to each other. Do this by placing one drawing on top of the 2nd drawing, then resize the drawing (press and hold SHIFT and ALT to maintain the proper ratio when resizing) and resize until both rulers are the same length. This will put both drawings into the same scale, something you will need to do if one is drawn on a 15 yard grid and another is drawn on a 20 yard grid, etc. After rescaling you can move and rotate the stages to properly place them on the range you are designing for. This is a must for designing 2 stages that occupy the same range. It is the only way to eliminate setup headaches on match day. No more shoot through problems on adjacent stages!
See example on last page.
Ruler Scale = Feet
Move and rotate ruler as need for measurements
Grid Background Scale = Yards

12. READ THIS BEFORE DELETING THIS TEXT BOX
Background Drawing Grid: 18 Yards x 23 Yards
READ THIS BEFORE DELETING THIS TEXT BOX
GRID BACKGROUND INSTRUCTIONS
The grid lines on this page are a background object. You cannot select, resize or move them.
WARNING: If you reformat this background, and save this template, you will loose the background grid permanently.
To remove the background for printing or viewing, use the Format Menu to Format the Background as White. To preserve the original template, save your work to a new filename by selecting File, Save as from the file menu.
Another method is to copy this slide and add it to the template as a new slide. If you use this method, you will protect yourself from inadvertently deleting the grid permanently. After copying the slide, do your work on the copy instead of the original. Remove any text boxes and the ruler as you need.
HELPFUL HINTS
DO NOT RESIZE THE RULER
Use this grid to do overhead view setup drawings. This will yield a properly scaled drawing you may use to eliminate shoot through targets, etc, and use as a measured drawing for match setup. To maintain the proper scale, size all your objects by using the ruler as a guide.
Placing 2 Stages on 1 Range
After completing your drawing, place the ruler at the bottom of the drawing and Group it with your drawing. Now you can copy and paste multiple drawings onto one slide. Next, resize your drawings relative to each other. Do this by placing one drawing on top of the 2nd drawing, then resize the drawing (press and hold SHIFT and ALT to maintain the proper ratio when resizing) and resize until both rulers are the same length. This will put both drawings into the same scale, something you will need to do if one is drawn on a 15 yard grid and another is drawn on a 20 yard grid, etc. After rescaling you can move and rotate the stages to properly place them on the range you are designing for. This is a must for designing 2 stages that occupy the same range. It is the only way to eliminate setup headaches on match day. No more shoot through problems on adjacent stages!
See example on last page.
Ruler Scale = Feet
Move and rotate ruler as need for measurements
Grid Background Scale = Yards

13. READ THIS BEFORE DELETING THIS TEXT BOX
Background Drawing Grid: 20 Yards x 28 Yards
READ THIS BEFORE DELETING THIS TEXT BOX
GRID BACKGROUND INSTRUCTIONS
The grid lines on this page are a background object. You cannot select, resize or move them.
WARNING: If you reformat this background, and save this template, you will loose the background grid permanently.
To remove the background for printing or viewing, use the Format Menu to Format the Background as White. To preserve the original template, save your work to a new filename by selecting File, Save as from the file menu.
Another method is to copy this slide and add it to the template as a new slide. If you use this method, you will protect yourself from inadvertently deleting the grid permanently. After copying the slide, do your work on the copy instead of the original. Remove any text boxes and the ruler as you need.
HELPFUL HINTS
DO NOT RESIZE THE RULER
Use this grid to do overhead view setup drawings. This will yield a properly scaled drawing you may use to eliminate shoot through targets, etc, and use as a measured drawing for match setup. To maintain the proper scale, size all your objects by using the ruler as a guide.
Placing 2 Stages on 1 Range
After completing your drawing, place the ruler at the bottom of the drawing and Group it with your drawing. Now you can copy and paste multiple drawings onto one slide. Next, resize your drawings relative to each other. Do this by placing one drawing on top of the 2nd drawing, then resize the drawing (press and hold SHIFT and ALT to maintain the proper ratio when resizing) and resize until both rulers are the same length. This will put both drawings into the same scale, something you will need to do if one is drawn on a 15 yard grid and another is drawn on a 20 yard grid, etc. After rescaling you can move and rotate the stages to properly place them on the range you are designing for. This is a must for designing 2 stages that occupy the same range. It is the only way to eliminate setup headaches on match day. No more shoot through problems on adjacent stages!
See example on last page.
Ruler Scale = Feet
Move and rotate ruler as need for measurements
Grid Background Scale = Yards

14. READ THIS BEFORE DELETING THIS TEXT BOX
Background Drawing Grid: 32 Yards x 43 Yards
READ THIS BEFORE DELETING THIS TEXT BOX
GRID BACKGROUND INSTRUCTIONS
The grid lines on this page are a background object. You cannot select, resize or move them.
WARNING: If you reformat this background, and save this template, you will loose the background grid permanently.
To remove the background for printing or viewing, use the Format Menu to Format the Background as White. To preserve the original template, save your work to a new filename by selecting File, Save as from the file menu.
Another method is to copy this slide and add it to the template as a new slide. If you use this method, you will protect yourself from inadvertently deleting the grid permanently. After copying the slide, do your work on the copy instead of the original. Remove any text boxes and the ruler as you need.
HELPFUL HINTS
DO NOT RESIZE THE RULER
Use this grid to do overhead view setup drawings. This will yield a properly scaled drawing you may use to eliminate shoot through targets, etc, and use as a measured drawing for match setup. To maintain the proper scale, size all your objects by using the ruler as a guide.
Placing 2 Stages on 1 Range
After completing your drawing, place the ruler at the bottom of the drawing and Group it with your drawing. Now you can copy and paste multiple drawings onto one slide. Next, resize your drawings relative to each other. Do this by placing one drawing on top of the 2nd drawing, then resize the drawing (press and hold SHIFT and ALT to maintain the proper ratio when resizing) and resize until both rulers are the same length. This will put both drawings into the same scale, something you will need to do if one is drawn on a 15 yard grid and another is drawn on a 20 yard grid, etc. After rescaling you can move and rotate the stages to properly place them on the range you are designing for. This is a must for designing 2 stages that occupy the same range. It is the only way to eliminate setup headaches on match day. No more shoot through problems on adjacent stages!
See example on last page.
Ruler Scale = Feet
Move and rotate ruler as need for measurements
Grid Background Scale = Yards

15. Drawing Grid Object: 16 Yards x 21 YRDS
This is an object that is click selectable, may be reformatted, etc. You can change the line color, move it, resize it, etc.
Use this page for printing your own graph paper.

16. Drawing Grid Object: 18 Yards x 23 YRDS
This is an object that is click selectable, may be reformatted, etc. You can change the line color, move it, resize it, etc.
Use this page for printing your own graph paper.

17. Drawing Grid Object: 23 Yards x 27 YRDS
This is an object that is click selectable, may be reformatted, etc. You can change the line color, move it, resize it, etc.
Use this page for printing your own graph paper.

18. Drawing Grid Object: 32 Yards x 42 YRDS
This is an object that is click selectable, may be reformatted, etc. You can change the line color, move it, resize it, etc.
Use this page for printing your own graph paper.