Download presentation
Presentation is loading. Please wait.
Published byNeil Gilbert Modified over 9 years ago
1
Remove 4 Phillips screws that hold tape drive cover (2 on each side) Phillips screws
2
Lift off tape drive cover
3
Turn mech 180 degrees so SCSI connector is facing you SCSI connector
4
2 very small Phillips screws hold the (green) head cleaner in place screws Green head cleaner
5
Remove these 2 screws screws
6
Slide cleaning brush assembly back and down behind white ribbon cable Brush assembly Ribbon cable
7
Servo motor is held in place by a small screw to the left of the motor, remove it Servo motor Retaining screw
8
Servo motor can be moved to the side slightly to disengage worm gear Servo motor Move
9
See bottom note for detail White Plastic gears Servo motor
10
Tape can now be removed from drive. Re-assemble in reverse order. Ejected cartridge
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.