1. Product Introductions SMART-HDL Z-Audio

2. Features  SD card music playing  Internal FM Radio  External audio input  FTP music playing

3. Connection diagrams

5. Programming Step1: find your Z-Audio from S-BUS A SD-card (format by FAT32) is needed to insert into the Z- Audio before power on.

6. Programming Step2: check IP address,Route IP and Port setting(Port: 6000 is a default factory setting, not need to modification ) Make sure that the IP of Z-Audio, PC, 1PROT are in the same network segment (e.g. 192.168.10.*).

7. Programming Step3: Refresh Playlists Create folders in SD-card, and save mp3 music files in these folders, each folder is a playlist in Z-audio, and Z-Audio can only play the music files which were saved in folders.

8. Programming Step4: Functions’ select and Radio Settings Enabled function(s) will be shown on the DLP’ music page.

9. Programming Step5: FTP setting(need to install a FTP server for Z-Audio ). After FTP setting, please refresh the playlists on ‘Playing Music Setting’ Label.

10. Programming Step6: Programming on Z-Audio finished. Step7: Set on DLP’s Music page label, add Z-Audio’s subnet ID and device ID, and Zone No.(Zone No.: each DLP can control 24 Z- Audio, so DLP has 24 Zone No. for Z-Audio control.)

11. Key1 left: press to shift audio source (long press to play settings ) right: PLAY/PAUSE Key2 Previous/Next playlist Key3 Previous/Next song Key5 to shift function pages Key4 Volume increase/decrease Play Music with DLP