1. SAFETY

2. Part 2

3. Safety Wear eye protection apron gloves

4. throwing objects is NOT allowed

5. you should always clean up your work area

6. Accidents never use a hand tool when others are standing within your safety zone

7. when using tools, do not wear loose, baggy clothing nor jewelry

8. never touch a spinning or rotating tool

9. never taste any substance nor object

10. Acids/Bases chemicals that release hydrogen or hydroxide ions when mixed with water, becoming corrosive

11. Chemicals Materials that may produce reactions leading to corrosion, noxious fumes, or other negative effects when used inappropriately

12. Combustibles any material that burns easily

13. Hand tools non-motorized implements used to do work in the lab

14. Hazardous waste materials that become toxic or could possible endanger species and the quality of the environment when released

15. Metals shiny, dense, malleable elements that can be toxic if ingested, inhaled in powder or vapor form, or taken in through the skin

16. MSDS Materials Safety and Data Sheet

17. contains information about chemicals purchased from a science supply vendor; lists all of the properties and possible hazards of the chemical

18. Organic compounds chemical compounds containing carbon, hydrogen, and often times oxygen bonded together

19. Safe environment teaching and learning conditions that promote and allow attitudes and procedures that avoid accidents and injury

20. Solvents materials that dissolve other chemicals

21. Toxins materials that are or may become harmful if taken into the body or released into the environment

22. Electrical Safety

23. any electrical circuit is a potential hazard

24. Unsafe Practices

25. using unsafe or defective tools or equipment

26. failure to de-energize equipment

27. using tools or equipment in an unsafe manner

28. working in hazardous places

29. Types of equipment frequently involved in electrical accidents :

30. motor driven equipment control devices portable electric tools switches panels

31. cutouts conductors plugs and fuses electric extension cords

32. Improperly Grounded ground wires are missing broken or improperly connected

33. What is the proper way to unplug or disconnect an electrical cord?

34. by the plug

35. It is unsafe to use a metal ladder while working on electrical equipment.