1. draft-li-mpls-proxy-te-lsp-01IETF 90 MPLS1 Proxy MPLS Traffic Engineering Label Switched Path(LSP) draft-li-mpls-proxy-te-lsp-01 Zhenbin Li, Xinzong Zeng Huawei Technologies IETF 90, Toronto, ON, Canada

2. draft-li-mpls-proxy-te-lsp-01IETF 90 MPLS2 Introduction [I-D.draft-li-mpls-seamless-mpls-mbh-00] introduces the requirement and framework of Seamless MPLS for mobile backhaul networks where MPLS TE is often deployed in for high reliability, QoS, etc. To achieve the above requirement this draft proposes a method to setup proxy egress MPLS TE LSP with RSVP-TE signaling protocol which could stitch with BGP LSP to form an end-to-end LSP.  Define a new RSVP-TE object: Proxy Destination Object  Procedures of set up proxy egress TE LSP

3. draft-li-mpls-proxy-te-lsp-01IETF 90 MPLS3 Solution of LSP Stitching in Seamless MPLS Stitch multiple LSP Segments setup by different MPLS signaling protocols Stitch proxy egress LSP with ingress LSP

4. draft-li-mpls-proxy-te-lsp-01IETF 90 MPLS4 RSVP-TE Extension IPv4 Proxy Destination Object Class-Num = TBD ((of form 0bbbbbbb) 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Length | Class-Num | C-Type (1) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | IPv4 Proxy Destination Address | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ IPv6 Proxy Destination Object 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Length | Class-Num | C-Type (2) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | | IPv6 Proxy Destination Address | | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

5. draft-li-mpls-proxy-te-lsp-01IETF 90 MPLS5 Procedures of set up proxy egress TE LSP Ingress: Use the proxy destination address to calculate path and the setup procedure is the same as current process. Egress: Identify itself as the proxy node, stitch the proxy RSVP-TE with the other LSP using tunnel end point address, return RESV message with the same proxy destination object. AN P AGN Remote AN LSP Path message Resv message PATH message Session Object : tunnel end point address = Remote AN Proxy Destination Object : proxy destination address = AGN PATH message Session Object : tunnel end point address = Remote AN Proxy Destination Object : proxy destination address = AGN PATH message Session Object : tunnel end point address = Remote AN Proxy Destination Object : proxy destination address = AGN PATH message Session Object : tunnel end point address = Remote AN Proxy Destination Object : proxy destination address = AGN RESV message Session Object: Proxy Destination Object : same as PATH message RESV message Session Object: Proxy Destination Object : same as PATH message RESV message Session Object: Proxy Destination Object : same as PATH message RESV message Session Object: Proxy Destination Object : same as PATH message

6. draft-li-mpls-proxy-te-lsp-01IETF 90 MPLS6 Updates Add one section which is problem statement. Modify the solution section and procedure section. Correct text errors.

7. draft-li-mpls-proxy-te-lsp-01IETF 90 MPLS7 Next Steps Solicit more comments on mailing list. More scenarios will be taken into account.