1. THE CAN Nick De La Cruz B8 2-20-14

2. MANUFACTURING PROCESS Raw Materials- Aluminum First aluminum can 1959 Weighed less than half an ounce

3. SHEARING  Used to cut straight lines on flat metal stock.  Performed on sheet, strip, bar, plate, and even angle stock. Aluminum  Brass  Bronze  Mild steel  Stainless steel

4. COATING Add think layer of paint Or picture of any kind

5. SLITTING Slitting-Separation of metal after coating

6. WELDING Weld- join together metal pieces by heating the surfaces to the point of melting using a blowtorch,

7. CURING This step is to preserve the welded cans

8. NECKING Necking -a short, plain, concave section between the capital and the shaft of a classical Doric or Tuscan column.

9. SEAMING Seam- join with a seam.

10. INSPECTION Later the cans are inspected. If the inspection is alright then they are palletized. And the process is complete.

11. LACQUERING To put a liquid into a protective coating of wood, metal etc.. Then more curing Last palletized

12. SOURCES http://www.jstradingco.com/can.html http://www.novelis.com/en-us/Pages/Raw-Materials-Recycling.aspx https://www.google.com/search?q=cans&safe=active&source=lnms&tbm=isch&sa=X&ei=1WUGU63fC- bmyQHD5oC4Cw&ved=0CAcQ_AUoAQ&biw=1242&bih=565 http://www.aluminum.org/Content/NavigationMenu/TheIndustry/PackagingConsumerProductMarket/Can/d efault.htm http://www.all-metalfab.com/shearing.shtml