Presentation is loading. Please wait.

Presentation is loading. Please wait.

SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 CCD Aluminum Nitride Invar frame CRIC, Clocks Molybdenum frame CCD.

Published byVictor Edwards Modified over 9 years ago

Similar presentations

Presentation on theme: "SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 CCD Aluminum Nitride Invar frame CRIC, Clocks Molybdenum frame CCD."— Presentation transcript:

1 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 CCD Aluminum Nitride Invar frame CRIC, Clocks Molybdenum frame CCD Package assembled

2 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Variations Connector Detector Assembly Thermal And Mechanical connection PC board Leads Coldplate Segment cutaway Coldplate Segment cutaway

3 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 CCD Aluminum Nitride Invar frame CRIC, Clocks Molybdenum frame Glue Cold Plate segment Package Components

4 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Exploded View from Back

5 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 CRIC chip and flex circuit Bump-bonded to Aluminum Nitride

6 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Add Glue

7 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Invar Frame positioned

8 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Invar Frame

9 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Molybdenum Frame

10 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Molybdenum Frame positioned

11 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Fold Flex circuit

12 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Fold Flex circuit

13 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Fold Flex circuit

14 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Back Side assembly

15 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Flex Circuit installation

16 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Flex Circuit installation

17 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Front Side prep Aluminum Nitride Invar frame CRIC, Clocks inside Molybdenum frame

18 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Aluminum Nitride Invar frame CRIC, Clocks inside Molybdenum frame CCD chip Glue Front Side elements

19 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Glue applied

20 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 CCD applied

21 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Wire Bonds applied

22 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Final Package with Coldplate segment

23 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Final Package with Coldplate segment

24 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Final Package installed onto Coldplate segment

25 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Adjacent Coldplate cells

26 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Adjacent Coldplate cells

27 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 3 x 3 Coldplate matrix

28 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 3 x 3 Detctor array Front

29 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 3 x 3 Detctor array Back

30 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Complete Detector Array Back

31 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Coldplate Assembly Back

32 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Coldplate Assembly Back

33 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Spectrometer Optical envelope in position

34 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Calibration Sources in position

35 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Fibre optic Array in position

36 SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 Focal Plane Assembly

Download ppt "SNAP CCD packaging study Flex-fold Internal flexure frame Robin Lafever September 2003 CCD Aluminum Nitride Invar frame CRIC, Clocks Molybdenum frame CCD."

Similar presentations

ZTF Mechanical Walkthrough Matthew Hoff 2013-02-01 ZTF Technical Meeting 1.

ZTF Mechanical Walkthrough Matthew Hoff ZTF Technical Meeting 1.
Equipment for Assembly Fluke Multimeter 115 True RMS Glue Ring Jig Flathead screwdriver 60 Watt desk lamp HIOS Cl 4000 Electric screw driver Anti-static.

Equipment for Assembly Fluke Multimeter 115 True RMS Glue Ring Jig Flathead screwdriver 60 Watt desk lamp HIOS Cl 4000 Electric screw driver Anti-static.
Manchester 09/sept/2008A.Falou & P.Cornebise {LAL-Orsay}1 CALICE Meeting/ Manchester Sept 2008 SLAB Integration & Thermal Measurements.

Manchester 09/sept/2008A.Falou & P.Cornebise {LAL-Orsay}1 CALICE Meeting/ Manchester Sept 2008 SLAB Integration & Thermal Measurements.
A vertical-flexure CCD module Bruce C. Bigelow University of Michigan Department of Physics 10/7/04.

A vertical-flexure CCD module Bruce C. Bigelow University of Michigan Department of Physics 10/7/04.
TMA-65 Workup Robin Lafever 30 April 20041 Detector geometry.

TMA-65 Workup Robin Lafever 30 April Detector geometry.
Corner Raft Conceptual Design Corner Raft Conceptual Design Kirk Arndt, Ian Shipsey Purdue University LSST Camera Workshop SLAC Sept. 16-19, 2008.

Corner Raft Conceptual Design Corner Raft Conceptual Design Kirk Arndt, Ian Shipsey Purdue University LSST Camera Workshop SLAC Sept , 2008.
Torch electronics test environment MCP readout update.

Torch electronics test environment MCP readout update.
Ceramic Focal Plane Components For SNAP B. C

Ceramic Focal Plane Components For SNAP B. C
PKI-Anwendungen 6/2/2015 1 Base framework. PKI-Anwendungen 6/2/2015 2 Bottom frame.

PKI-Anwendungen 6/2/ Base framework. PKI-Anwendungen 6/2/ Bottom frame.
GLAST LAT Readout Electronics Marcus ZieglerIEEE 2005 1 SCIPP The Silicon Tracker Readout Electronics of the Gamma-ray Large Area Space Telescope Marcus.

GLAST LAT Readout Electronics Marcus ZieglerIEEE SCIPP The Silicon Tracker Readout Electronics of the Gamma-ray Large Area Space Telescope Marcus.
Colorado Space Grant Consortium Timing Circuit HW #4 Class #07 Timing Circuit HW #4 Class #07.

Colorado Space Grant Consortium Timing Circuit HW #4 Class #07 Timing Circuit HW #4 Class #07.
The AMS-02 detector is based on a large acceptance (~0.5 m²sr) and high sensitivity spectrometer composed by a super-conducting magnet (0.8 T), cooled.

The AMS-02 detector is based on a large acceptance (~0.5 m²sr) and high sensitivity spectrometer composed by a super-conducting magnet (0.8 T), cooled.
Interconnection in IC Assembly

Interconnection in IC Assembly
Science Specification Table 12 keV - 250 keV for neutral particles 40.5 cm 2 image plane Electronic Noise 3 keV FWHM Proton Dead Layer

Science Specification Table 12 keV keV for neutral particles 40.5 cm 2 image plane Electronic Noise 3 keV FWHM Proton Dead Layer
Integration and Test 14 October 2008 Martin Nordby.

Integration and Test 14 October 2008 Martin Nordby.
5.8m Solar House Installation Instruction. Introduction Step 1. connect the corner panels Step 2. connect the back and side wall panels Step 3. Install.

5.8m Solar House Installation Instruction. Introduction Step 1. connect the corner panels Step 2. connect the back and side wall panels Step 3. Install.
Cryostat Structural, Thermal, and Vacuum Systems 14 October 2008 Martin Nordby, Gary Guiffre, John Ku, John Hodgson.

Cryostat Structural, Thermal, and Vacuum Systems 14 October 2008 Martin Nordby, Gary Guiffre, John Ku, John Hodgson.
Berkeley workshop summary Redundancy : dual detector Field of view : 3”x6” Spectrograph length goal: < 400 mm Isostatic mount on the base plate with control.

Berkeley workshop summary Redundancy : dual detector Field of view : 3”x6” Spectrograph length goal: < 400 mm Isostatic mount on the base plate with control.
Eddington Kick-Off. Vienna, September 17th, 2001 T.Muñoz/C.Laviada (INTA) 1 EddiCam: The Eddington Photometric Camera Preliminary Design Layout.

Eddington Kick-Off. Vienna, September 17th, 2001 T.Muñoz/C.Laviada (INTA) 1 EddiCam: The Eddington Photometric Camera Preliminary Design Layout.
PACS IHDR 12/13 Nov 2003 PACS FPU Optics: Concept and Alignment R. Graue, D. Kampf Kayser-Threde.

PACS IHDR 12/13 Nov 2003 PACS FPU Optics: Concept and Alignment R. Graue, D. Kampf Kayser-Threde.

Similar presentations

Ads by Google