1. Replacing the Main Monitor 1.Open Lower Main Door, and turn off machine power 2.Open the upper main door 3.Disconnect the video and power plugs from the LCD 4.Disconnect the touch screen controller from the backplane, @ P10.

2. Replacing the Main Monitor 5. Remove the screen’s two side trims. Using a standard Philips screwdriver, remove the six screw holding the side trims.

3. Replacing the Main Monitor 6. Unclip the screen’s monitor mask. Note: There will be four clips on the backside of the door frame; (2) on the top and (2) on the bottom.

4. Replacing the Main Monitor 7. While supporting the LCD, remove the (4) screws hold the LCD to the door frame.

5. Replacing the Main Monitor 8. Remove the LCD from the door frame. Replacement of the LCD, is the reversal of the removal procedure.