1. How photocopier works R.B.Chavan Department of Textile Technology Indian Institute of Technology Hauz-Khas, New Delhi 110016

2. Basic steps Open the copier lid Place the document to be photocopied face-down on the glass Select the options you want (number of pages, enlargements, lighter/darker) Press the Start button

3. What happens Basic principle Electrostatic attraction Main component Light sensitive photoconductive drum made coated with selemnium or photoconductive polymer. The surface of the drum is charged. An intense beam of light moves across the paper that you have placed on the copier's glass surface. Light is reflected from white areas of the paper and strikes the drum below.light Wherever of light hits, electrons are emitted from the photoconductive atoms in the drum and neutralize the positive charges above. Dark areas on the original (such as pictures or text) do not reflect light onto the drum, leaving regions of positive charges on the drum's surface.electronsatoms

4. Toner attraction Toner It is a mixture of colour pigment and thermoplastic polymer The toner is -vely charged -ve charged toner gets attracted to +ve charge image on photoconductive drum Paper is charged +ve -ve charge toner in the form of image is attracted to +ve charge paper The paer then heated during which thermoplastic binder softens and help to adhere the pigment colour on the paper

5. Steps Step 1Step 2

6. Step 3Step 4

7. Step 5 Step 6

8. Step 7 Step 8

10. 1. Clean platen, ready for service

11. 2. Produce image for replication

12. 3. Charge platen with corona wire charge leaks off wire because of corona discharge, with associated "ozone smell" in some cases

13. 4. Expose platen to image illuminated part of platen allows charge to leak away because of photoconduction

14. 5. Dark areas stay charged

15. 6. "Charge image" of original

16. 7. Expose platen to toner toner is carried electrostatically by carrier particlecarrier particle released onto the relatively stronger charge of the platen

17. Specks of toner can be seen clinging to the larger carrier particle.

18. 8. "Toner image" of original

19. 9. Introduce paper for copy

20. 10. Charge paper w/ corona wire

21. 11. Paper ready to receive toner

22. 12. Toner adheres to paper

23. 13. Toner image on paper

24. 14. Toner fused to paper 1.-- accomplished by heated rollers and a bit of pressure, hence the warm, sometimes "curled", paper 2. Cleaning and back to Step 1.Step 1