1. This PowerPoint is a quick guide to configuration of SheepShaver (v 2.3) for running Mac OS 8.5 to 9.0.2 on a Mac Intel under OS X, 10.4.9 This is a helper. In no case the author can be considered liable of bad issues on your computer… Jean-Pascal Cogné Université de Paris 7 - Denis Diderot IPG 4 Place Jussieu 75252 Paris Cedex 05 France Any comment ? : click

2. Before starting, you will need:  A Mac ROM, normally present on every Mac OS 8 or 9 install CD.  A generic Mac OS 8 or 9 install CD… Not an install dedicated to a given machine, as often distributed with machines in the past, but a general OS install… OK, let’s go…!

3. Here is the content of SheepShaver folder, after download, and following the instructions of Gwenolé Beauchesne at: http://gwenole.beauchesne.info/en/projects/sheepshaver/help/installation http://gwenole.beauchesne.info/en/projects/sheepshaver/help/installation Installing SheepShaver on a Mac Intel

4. You will need an OS ROM from Mac.. This ROM can be found on any Mac OS 8 or 9 install CD; see also numerous forums on this subject.. See: http://www.gibix.net/dokuwiki/en:projects:sheepshaver for more info…http://www.gibix.net/dokuwiki/en:projects:sheepshaver Installing SheepShaver on a Mac Intel

5. Then… run SheepShaverGUI.. Installing SheepShaver on a Mac Intel

6. Here is the first Tab of SheepShaverGUI: The place where you define volumes and shared folders… Installing SheepShaver on a Mac Intel

7. Here is the first Tab of SheepShaverGUI: 1. Create a disk image which will contain your Mac Installing SheepShaver on a Mac Intel

8. Here is the first Tab of SheepShaverGUI: 1. Create a disk image which will contain your Mac Here I have created a 4GB disk in the SheepShaver Directory… Installing SheepShaver on a Mac Intel

9. Here is the first Tab of SheepShaverGUI: 1. Create a disk image which will contain your Mac Here I have created a 4GB disk in the SheepShaver Directory… Installing SheepShaver on a Mac Intel

10. Here is the first Tab of SheepShaverGUI: 2. In principle, you should then define here the Unix path to a shared folder on your Mac OSX… Installing SheepShaver on a Mac Intel

11. 3. However, personnaly, I found this shared folder did not work properly, and preferred to create a new (512Mb) disk image, using « Disk Utilities » of OSX, place it in SheepShaver folder, and add it in the above list using the Add button. Here is the first Tab of SheepShaverGUI: Installing SheepShaver on a Mac Intel

12. Here is the first Tab of SheepShaverGUI: 4. Finally, select "Boot from CD-ROM", in order to load Mac OS 9 from the install disk at the 1 st run of SheepShaver… Installing SheepShaver on a Mac Intel

13. At this stage, you should have your 2 hard disks in the SheepShaver folder… Generated using the Create button of SheepShaveGUI Generated using Mac OSX Disk Utilities (new disk image) Installing SheepShaver on a Mac Intel

14. In the second Tab, you setup the size of your Mac window… No comments… Installing SheepShaver on a Mac Intel

15. Third Tab: define the link to keycodes.sdl file Use the Browse button to define the path of this file which is normally situated in your SheepShaver folder Installing SheepShaver on a Mac Intel

16. Fourth Tab: defining serial ports… I did not make anything here.. There are numerous forums on this subject, if needed… Installing SheepShaver on a Mac Intel

17. Fifth Tab: one of the most important settings, memory..! Installing SheepShaver on a Mac Intel

18. Fifth Tab: one of the most important settings, memory..! 1. Define the size of the memory you wish to use in your Mac.. here set at 512 Mb Installing SheepShaver on a Mac Intel

19. Fifth Tab: one of the most important settings, memory..! 2. Use the Browse button to specify the path to Mac ROM I have renamed it Mac_OS_ROM, and placed it in the SheepShaver folder Installing SheepShaver on a Mac Intel

20. And the final Tab… Be sure to check the Enable JIT Compiler checkbox… Installing SheepShaver on a Mac Intel

21. And that’s all..! Just click on Start button, with the Mac OS install CD in the disk drive… Important Notes: - Mac Install CD should be loaded in the disk drive before loading SheepShaverGUI (i.e. before the first step of this tutorial…) - SheepShaver should start on the CD, and you are ready to install MacOS (8.5 to 9.0.2 recommended) - and finally…. Installing SheepShaver on a Mac Intel

22. You will be fascinated by this wonderful PaleoMac application running under Mac OS 9 on your Mac Intel…! Installing SheepShaver on a Mac Intel

23. A few tips… (1) I have placed an alias of SheepShaver on OS X desktop, renamed it Mac OS9 HD, and changed its icon… NOTE: this is NOT an alias of the hard disk generated by SheepShaverGUI as explained in previous steps… Installing SheepShaver on a Mac Intel

24. Installing SheepShaver under Windows XP A few tips… (2) I have also placed an alias of the 2nd disk on OS X desktop… This is my way to exchange data between OS X and OS 9… Installing SheepShaver on a Mac Intel

25. Any comment or suggestion? cogne@ipgp.jussieu.frcogne@ipgp.jussieu.fr