1. 8-Mar-16S.Movchan Straw manufacturing and QC1 Straw machine status 01_09_2010 machine alignment check by laser level control device machine set up after upgrade parameters optimization “new” straws compare “new” straws with “old” straws straw storage box and room Presented by S.Movchan

2. 8-Mar-16S.Movchan Straw manufacturing and QC2 Laser X-Y level control device

3. 8-Mar-16S.Movchan Straw manufacturing and QC3 Machine elements vertical alignment check

4. 8-Mar-16S.Movchan Straw manufacturing and QC4 Machine elements horizontal alignment check

5. 8-Mar-16S.Movchan Straw manufacturing and QC5 Straw machine current set up

6. 8-Mar-16S.Movchan Straw manufacturing and QC6 Common view

7. 8-Mar-16S.Movchan Straw manufacturing and QC7 Tape transportation Tape pretention F=350 gram

8. 8-Mar-16S.Movchan Straw manufacturing and QC8 Rollers position

9. 8-Mar-16S.Movchan Straw manufacturing and QC9 Anvil prototype Advantages: - set of anvils (from different materials, any shape) - easy change - all parts is polish - possibility to install diodes for seam lighting from inside Stainless still D=9.73 mm

10. 8-Mar-16S.Movchan Straw manufacturing and QC10 Fixture Teflon D=9.90 mm

11. 8-Mar-16S.Movchan Straw manufacturing and QC11 Ultrasonic generator Nominal F=39300 Hz

12. 8-Mar-16S.Movchan Straw manufacturing and QC12 Generator stability study: frequency vs Temp K=-20 Hz/degree

13. 8-Mar-16S.Movchan Straw manufacturing and QC13 Sonotrode cooling T=(27±1) degree F=(39300±50) Hz

14. 8-Mar-16S.Movchan Straw manufacturing and QC14 Power Power: 10, 20 …100 a.u.

15. 8-Mar-16S.Movchan Straw manufacturing and QC15 Sonotrode pressure to tape regulation K=10 g/mm

16. 8-Mar-16S.Movchan Straw manufacturing and QC16 Sonotrode angle About 8.5 degree

17. 8-Mar-16S.Movchan Straw manufacturing and QC17 Straw speed transportation

18. 8-Mar-16S.Movchan Straw manufacturing and QC18 Clean room: T and H monitoring (August 2010)

19. 8-Mar-16S.Movchan Straw manufacturing and QC19 Dubna tensile machine Sample: O-ring h=5.0 mm

20. 8-Mar-16S.Movchan Straw manufacturing and QC20 Machine verification Fmax= 6.1 kg Elastic limit is about F=4 kg per 5 mm straw ring Fmax= 5.4 kg Elastic limit is about F=3.9 kg sample width W =10 mm Hostaphan RNK 2600 36 mkm

21. 8-Mar-16S.Movchan Straw manufacturing and QC21 “Old” straw F=(3-5) kg, Fmax=6.4 kg

22. 8-Mar-16S.Movchan Straw manufacturing and QC22 F vs dL (“old” straw machine status) “Old” straw machine status: F ≥ 3 kg

23. 8-Mar-16S.Movchan Straw manufacturing and QC23 Good seams: PET nonelastic elongation: dL=(3-16) mm at F=(4.3-6.4) kg

24. 8-Mar-16S.Movchan Straw manufacturing and QC24 Reference seam: F=6.4 kg, dL=16 mm Back lightFront light dL=16 mm

25. 8-Mar-16S.Movchan Straw manufacturing and QC25 Example of bracken seams (back light) Sample #19: 6.0 kgSample #03: 4.9 kg

26. 8-Mar-16S.Movchan Straw manufacturing and QC26 Parameters optimization after straw machine upgrade

27. 8-Mar-16S.Movchan Straw manufacturing and QC27 Ultrasonic generator + sonotrode: standard mode vs cooling mode T=26 degree f: (39300±50) Hz T=35 degree f: 39300 -> 39120 Hz F=180 gram, W=60 a.u. V=10 mm/sec Near the same => cooling mode was chosen F=4 kG

28. 8-Mar-16S.Movchan Straw manufacturing and QC28 Parameters optimization: Force: F=(190±30) gram Ultrasonic power: W=(40±10) a.u. F= 180 g V=10 mm/sec W= 40 a.u. V=10 mm/sec

29. 8-Mar-16S.Movchan Straw manufacturing and QC29 Parameters optimization: Speed: No dependence V=(10-20) mm/sec F= 180 g W=40 a.u.

30. 8-Mar-16S.Movchan Straw manufacturing and QC30 New straws after straw machine upgrade

31. 8-Mar-16S.Movchan Straw manufacturing and QC31 New straws: #3644 and #3645 F=4.2 kG -> 5.0 kG F=4.2 kG -> 3.5 kG F=210 gram, W=60 a.u. V=10 mm/sec

32. 8-Mar-16S.Movchan Straw manufacturing and QC32 New straw: #3643 F=4.5 kG -> 4.0 kG F=200 gram, W=60 a.u. V=10 mm/sec

33. 8-Mar-16S.Movchan Straw manufacturing and QC33 New straw: #3646 F=4.0 kG -> 4.0 kG F=180 gram, W=60 a.u. V=10 mm/sec

34. 8-Mar-16S.Movchan Straw manufacturing and QC34 New straw: #3652 (check Ribbon option) F=205 G, W=60 a.u. V=10 mm/sec F=2.5 kG -> 3.0 kG

35. 8-Mar-16S.Movchan Straw manufacturing and QC35 New straw: #3658 (check Ribbon option) F=4.0 kG -> 3.0 kG F=300 G, W=40 a.u. V=10 mm/sec

36. 8-Mar-16S.Movchan Straw manufacturing and QC36 Conclusion Tensile machine in operation “Old” straws: Al straw (53 samples after test dP=3 Bar): F=(3.3-5.3) kg Cu+Au straw (48 samples, not tested at dP=3 bar): F=(2.9-5.0) kg, for 2 samples F=6.0 kg and F=6.4 kg Good seam: - PET alloy on both seam sides - F>4.3 kg (dL=2 mm) “New” straw: the same parameters

37. 8-Mar-16S.Movchan Straw manufacturing and QC37

38. 8-Mar-16S.Movchan Straw manufacturing and QC38 Straw storage box

39. 8-Mar-16S.Movchan Straw manufacturing and QC39 Storage room view

40. 8-Mar-16S.Movchan Straw manufacturing and QC40