Presentation is loading. Please wait.

Presentation is loading. Please wait.

CMS TAXS REGION D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting 29 09 20151.

Published byMorgan Newton Modified over 9 years ago

Similar presentations

Presentation on theme: "CMS TAXS REGION D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting 29 09 20151."— Presentation transcript:

1 Services @ CMS TAXS REGION D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting 29 09 20151

2 Lukasz Krzempek 01.09.2015 1 TE-VSC-DLM General view of 3d conceptual design (ATLAS&CMS) 1)Created solution is a baseline of current vacuum system 2)Where possible – aluminium solution (transition) 3)BPMSW 4)3 structures to remove independently: gate valve TAS, VAX+BPM, gate valve IR 5)Long bellows to transfer transversal & longitudinal while short ones - longitudinal TA S Experimen t Alignment issues Sector valve moves with TAS absorber Sector valve moves with vacuum chamber VAX+BPM moves independently Pumping/venting lines together with angle valve on site Tunnel

3 D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting3 DN100 valves.

4 Cabling management (1) Lukasz Krzempek 01.09.2015 6 TE-VSC-DLM Nomenclature: Tce: thermocouple type E VEC: heating collar VET: heating tape + insulation thickness 8mm VEJ: heating jacket + insulation thickness 25mm Calculated section: 1055mm2 Ion pump cable assumption ~D1cm Total: 1200mm2 ? Services needs. Cabling.

5 Cabling/piping management (2) Lukasz Krzempek 01.09.2015 7 TE-VSC-DLM Outside diameters: 1.Flange DN63 + heating collar OD114+3 thickness (mm)= OD120 (mm) ~140 (mm) 2.Tube DN63 + heating tape + insulation OD63+tape+8 thickness (mm)=83 (mm) ~100 (mm) 3. Bellow + heating tape + insulation OD83 + tape + 8/25 (mm) = 103/135 (mm) ~120/150 (mm) The rest of pumping/ venting instrument s depends on design Services needs. Piping.

6 D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting6 Services routing. Allow RS opening Allow TAXS alignment Allow Remote handling

7 D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting7 Piping routing through first FIN disk.

8 D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting8

9 9

10 Close-up of the bellow & flanges at 16m A. Gaddi (20 th WP8 Bi-weekly meeting)

11 Study for a new support of the vacuum pump Interference with vacuum remote handling system A. Gaddi (20 th WP8 Bi-weekly meeting)

12 D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting12 ST0698951 Q1TASL3 assembly (Vacuum layout) ST0710906 (Vacuum support) ST0667308 & ST0667348 (Integration ) For the time being, these models are integrated in ST0081246 (Ens Forward RB54), which is an old Euclid import. CATIA models Next step is the integration with CMS CATIA Models

13 Situation actuelle D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting 13 1447mm 990mm 1480mm

14 Situation actuelle D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting 14 430 mm 150 mm

15 D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting 15 Situation actuelle

16 D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting 16 Situation actuelle

17 Baseline scénario D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting 17

18 Baseline scénario D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting 18

19 Baseline scénario D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting 19

20 TAXS next steps, detail studies Integration in CMS Forward region CATIA model Alignment (BP support & TAXS) Vacuum: from DN100 to DN63 Connection Q1-TAXS Risk assessment Interventions, remote handling D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting20

21 D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting21

22 D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting22

Download ppt "CMS TAXS REGION D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting 29 09 20151."

Similar presentations

19th – 20th of September 2007Cryogenic Expert Meeting at GSI, Jan Patrick Meier1/11 Cryogenic Experts Meeting at GSI, 2007 The SIS 100 Cryogenic Jumper.

19th – 20th of September 2007Cryogenic Expert Meeting at GSI, Jan Patrick Meier1/11 Cryogenic Experts Meeting at GSI, 2007 The SIS 100 Cryogenic Jumper.
Update on Q1 TAS REGION (18 to 22m), layouts. D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting1.

Update on Q1 TAS REGION (18 to 22m), layouts. D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting1.
ColUSM #51 30 th January, 2015 D. Duarte Ramos, C. Mucher, L. Gentini, T. Sahner, H. Prin, R. Wawrowski, Q. Deliege, V. Baglin, F. Savary.

ColUSM #51 30 th January, 2015 D. Duarte Ramos, C. Mucher, L. Gentini, T. Sahner, H. Prin, R. Wawrowski, Q. Deliege, V. Baglin, F. Savary.
The HiLumi LHC Design Study is included in the High Luminosity LHC project and is partly funded by the European Commission within the Framework Programme.

The HiLumi LHC Design Study is included in the High Luminosity LHC project and is partly funded by the European Commission within the Framework Programme.
24/01/08Energy deposition, LIUWG, Elena Wildner1 Upgrade phase 1: Energy deposition in the triplet Elena Wildner Francesco Cerutti Marco Mauri.

24/01/08Energy deposition, LIUWG, Elena Wildner1 Upgrade phase 1: Energy deposition in the triplet Elena Wildner Francesco Cerutti Marco Mauri.
IR2 and IR4 Summary PEP-II meeting Jan. 23, 2006 M. Sullivan.

IR2 and IR4 Summary PEP-II meeting Jan. 23, 2006 M. Sullivan.
ATLAS TAS REGION. POSSIBLE MODIFICATIONS IN JTT D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting1.

ATLAS TAS REGION. POSSIBLE MODIFICATIONS IN JTT D. Brethoux, M. Lazzaroni, F. Sanchez Galan, WP8 meeting1.
Consolidation and Upgrade of the LHC Experimental Vacuum Sectors

Consolidation and Upgrade of the LHC Experimental Vacuum Sectors
13 Dec. 2004 MAC Review – Future IR Heating Issues 1 Future IR Heating Issues 13 December 2004 Stan Ecklund.

13 Dec MAC Review – Future IR Heating Issues 1 Future IR Heating Issues 13 December 2004 Stan Ecklund.
1 Integration of collimators in the dispersion suppressors Status of 11 T cryo- assembly integration Dec 17, 2013

1 Integration of collimators in the dispersion suppressors Status of 11 T cryo- assembly integration Dec 17, 2013
1 Presented at ColUSM by D. Ramos on behalf of the Cold Collimator Feasibility Study Working Group https://espace.cern.ch/CCFS/default.aspx Longitudinal.

1 Presented at ColUSM by D. Ramos on behalf of the Cold Collimator Feasibility Study Working Group Longitudinal.
SLHC - WP7 Barrel UPDATE on LAYOUT OF SERVICES AT THE BARREL ENDS OPTO PCBS: Sketches describe options after discussion with Tony Weidberg (6.6.2007) Preference.

SLHC - WP7 Barrel UPDATE on LAYOUT OF SERVICES AT THE BARREL ENDS OPTO PCBS: Sketches describe options after discussion with Tony Weidberg ( ) Preference.
SiD Forward Region Tom Markiewicz/SLAC KILC’12, Taegu, Korea 24 April 2012.

SiD Forward Region Tom Markiewicz/SLAC KILC’12, Taegu, Korea 24 April 2012.
30/05-03/06/2007 LCWS2007 and ILC2007, DESY Hamburg Germany Vacuum System Specifications What needs to be specified in Vacuum Specification for ICL Damping.

30/05-03/06/2007 LCWS2007 and ILC2007, DESY Hamburg Germany Vacuum System Specifications What needs to be specified in Vacuum Specification for ICL Damping.
Status of vacuum & interconnections of the CLIC main linac modules C. Garion TE/VSC TBMWG, 9 th November 2009.

Status of vacuum & interconnections of the CLIC main linac modules C. Garion TE/VSC TBMWG, 9 th November 2009.
Shielding the Turbomolecular Pump: an update 14 May 2013 Kiril Marinov ASTeC, MaRS, DL 1.

Shielding the Turbomolecular Pump: an update 14 May 2013 Kiril Marinov ASTeC, MaRS, DL 1.
LINAC 4 Project L4T/L4Z Design Status J.Humbert / B.Riffaud on behalf of EN-MME design team 1 st September 2011 LINAC4 – BEAM COORDINATION COMMITTEE B.Riffaud.

LINAC 4 Project L4T/L4Z Design Status J.Humbert / B.Riffaud on behalf of EN-MME design team 1 st September 2011 LINAC4 – BEAM COORDINATION COMMITTEE B.Riffaud.
MQXF Cold-mass Assembly and Cryostating H. Prin, D. Duarte Ramos, P. Ferracin, P. Fessia 4 th Joint HiLumi LHC-LARP Annual Meeting November 17-21, 2014.

MQXF Cold-mass Assembly and Cryostating H. Prin, D. Duarte Ramos, P. Ferracin, P. Fessia 4 th Joint HiLumi LHC-LARP Annual Meeting November 17-21, 2014.
FP 420 Connection Cryostat Design and Integration Keith Potter, Jaak Lippmaa, Guido Ryckwaert, Benoit Florin, Thierry Renaglia, Thierry Colombet, Shrikant.

FP 420 Connection Cryostat Design and Integration Keith Potter, Jaak Lippmaa, Guido Ryckwaert, Benoit Florin, Thierry Renaglia, Thierry Colombet, Shrikant.
Experimental Beampipes: Status and Outlook Ray Veness / AT-VAC For the beampipe team With many thanks to the experiment’s installation and coordination.

Experimental Beampipes: Status and Outlook Ray Veness / AT-VAC For the beampipe team With many thanks to the experiment’s installation and coordination.

Similar presentations

Ads by Google